Productfeatures
- Enclosure with mounting slots
- Actuation from front
- Non-contact principle
- 5 reed contacts
- Long life
- LED switching conditions display
- connector
- Thermoplastic enclosure
- Reed-contact to clip-in, on-location assembly
Data
Ordering data
Product type description | BN 85-5-2031 |
Article number (order number) | 101118378 |
EAN (European Article Number) | 4030661050058 |
eCl@ss number, version 9.0 | 27-27-01-05 |
eCl@ss number, version 11.0 | 27-27-01-05 |
ETIM number, version 7.0 | EC002544 |
ETIM number, version 6.0 | EC002544 |
General data
Working principle | Magnetic drive |
Housing construction form | rectangular |
Enclosure material | Glass-fibre, reinforced thermoplastic |
Gross weight | 106 g |
General data - Features
Latching | Yes |
Suitable for elevators | Yes |
Integral system diagnostics, status | Yes |
Number of Snap-in contacts, maximum | 5 |
Number of Snap-in contacts, minimum | 1 |
Mechanical data
Actuating panels | front side |
Actuating element | Magnet |
Mechanical life, minimum | 1,000,000,000 Operations |
Mounting | Enclosure with mounting slots |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance S | 1 mm … 14 mm |
Note (Switching distance Sn) | The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed. |
Mechanical data - Connection technique
Type of connection | Connector, 10-pole |
Mechanical data - Dimensions
Length of sensor | 140 mm |
Width of sensor | 65 mm |
Height of sensor | 20 mm |
Ambient conditions
Degree of protection | IP30 to EN 60529 |
Ambient temperature, minimum | -10 °C |
Ambient temperature, maximum | +75 °C |
Restistance to shock | 60 g, on sine wave oscillation |
Electrical data
Switching voltage, minimum | 12 VDC |
Switching voltage, maximum | 60 VDC |
Switching current, maximum | 1 A |
Switching capacity, maximum | 30 W |
Switching element | bistable contact |
Electrical data - Digital Output
Design of switching elements | Reed contacts |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Accessory
Recommendation (actuator) | BP 7 |
Recommendation (actuator, lift switchgear) | BP 7 |
Note
Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. |
Operating instructions and Declaration of conformity
BN 85-5
EC Declaration of conformity
Magnetic reed switch