101127030 - IFL 15-30L-11STP-1766
- Brand: Schmersal
- Product Code: 101127030
Description: Product type description:IFL (1)-(2)(3)-(4)(5)(6)(7)-(8)(1)10Switching distance 10 mm
15Switching distance 15 mm
(2)30Cylinder, thread M30, metal300Cylinder, thread M30, plastic(3)withoutStandard bodyMMiniature bodyLLong design(4)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(5)withoutCableSTMale connectorTConductor with strain reliefDDC 2-wire(6)withoutStandard connector version2Alternative conector version(7)Nn-typePp-type(8)1310Can be used up to +110C (for alternating current (AC) only)2130Can be used up to +130C, without LED switching conditions display1766Can be used up to +110C (for p-type or n-type only)
Description: Product type description:IFL (1)-(2)(3)-(4)(5)(6)(7)-(8)(1)10Switching distance 10 mm
15Switching distance 15 mm
(2)30Cylinder, thread M30, metal300Cylinder, thread M30, plastic(3)withoutStandard bodyMMiniature bodyLLong design(4)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(5)withoutCableSTMale connectorTConductor with strain reliefDDC 2-wire(6)withoutStandard connector version2Alternative conector version(7)Nn-typePp-type(8)1310Can be used up to +110C (for alternating current (AC) only)2130Can be used up to +130C, without LED switching conditions display1766Can be used up to +110C (for p-type or n-type only)
Productfeatures
- Metal enclosure
- DC 4-wire
- Long design
- Connector
- Design M30
Data
Ordering data
Product type description | IFL 15-30L-11STP-1766 |
Article number (order number) | 101127030 |
EAN (European Article Number) | 4030661278315 |
eCl@ss number, version 9.0 | 27-27-01-01 |
eCl@ss number, version 11.0 | 27-27-01-01 |
ETIM number, version 7.0 | EC002714 |
ETIM number, version 6.0 | EC002714 |
Approvals - Standards
Certificates | CCC |
General data
Standards | DIN VDE 0660-208 IEC/EN 60947-5-2 |
Housing construction form | Cylinder, thread |
Installation conditions (mechanical) | not flush |
Enclosure material | Brass |
Enclosure coating material | nickel-plated |
Active area | Plastic |
Material of the nuts | Brass |
Gross weight | 130 g |
General data - Features
Integral system diagnostics, status | Yes |
Number of cable wires | 4 |
Mechanical data
Tightening torque of nuts, maximum | 30 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance | 15 mm |
Mechanical data - Connection technique
Type of connection | Connector |
Mechanical data - Dimensions
ISO thread of the sensor | M30 |
width across flats | 36 BK |
Length of sensor | 100 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | +0 °C |
Ambient temperature, maximum | +110 °C |
Protection class | 0 |
Electrical data
Voltage type | DC (direct current) |
Operating voltage, minimum | 10 V |
Operating voltage, maximum | 60 V |
No-load supply current, maximum I | 4 mA |
Operating current | 200 mA |
Switching element | NO contact and NC contact (antivalent) |
Protection circuit integrated | inductive interference protection Protection against polarity reversal |
Switching frequency, approx. | 50 Hz |
Electrical data - Digital Output
Voltage drop U | 1 V |
Current at Voltage drop U | 0.2 A |
Design of switching elements | p-type |
Status indication
Note (Integral System Diagnostics, status ) | yellow LED |
Note
Note (General) | Instead of nuts, a mounting clamp can be provided. |
Operating instructions (supplementary sheet/quick guide)
IFL Inductive proximity switch
EC Declaration of conformity
IFL Inductive proximity switch