101178190 - BNS 16 ST3-AS D
- Brand: Schmersal
- Product Code: 101178190
Description: Product type description:BNS 16(1)-AS (2)(1)ST1Bottom-side connectorST2Connector at the right-hand sideST3Connector at the left-hand side(2)VActuation front sideDActuation cover-side
Description: Product type description:BNS 16(1)-AS (2)(1)ST1Bottom-side connectorST2Connector at the right-hand sideST3Connector at the left-hand side(2)VActuation front sideDActuation cover-side
Productfeatures
- connector plug M12, left, 4-pole
- Safety sensor
- Thermoplastic enclosure
- no mechanical wear
- 40 mm x 90 mm x 39 mm
- Integrated AS-Interface
- Concealed mounting possible
- Long life
- Insensitive to transverse misalignment
- Insensitive to soiling
- AS-Interface LED and status display
Data
Ordering data
Product type description | BNS 16 ST3-AS D |
Article number (order number) | 101178190 |
EAN (European Article Number) | 4030661310091 |
eCl@ss number, version 9.0 | 27-27-24-02 |
eCl@ss number, version 11.0 | 27-27-24-02 |
ETIM number, version 7.0 | EC002544 |
ETIM number, version 6.0 | EC002544 |
Approvals - Standards
Certificates | TÜV cULus ASi-SaW EAC |
General data
Standards | EN 62026-2 EN ISO 13849-1 IEC 60947-5-3 IEC 61508 |
Working principle | Magnetic drive |
Installation conditions (mechanical) | quasi-flush |
Enclosure material | Glass-fibre, reinforced thermoplastic |
Gross weight | 145 g |
Reaction time, maximum | 100 ms |
General data - Features
Coding | Yes |
Integral system diagnostics, status | Yes |
Mechanical data
Active area | cover-side |
Actuating element | Magnet |
Repeat accuracy | ≤ 0.1 x S |
Direction of motion | Head-on to the active surface |
Mechanical data - Switching distances according EN IEC 60947-5-3
Assured switching distance "ON" S | 8 mm |
Assured switching distance "OFF" S | 18 mm |
Mechanical data - Connection technique
Type of connection | Connector plug M12, 4-pole, (A-coding) |
Connector position | Left |
Mechanical data - Dimensions
Length of sensor | 38.5 mm |
Width of sensor | 40 mm |
Height of sensor | 90 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +60 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +70 °C |
Resistance to vibration to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
Restistance to shock | 30 g / 11 ms |
Protection class | II |
Ambient conditions - Insulation values
Rated insulation voltage U | 32 VDC |
Rated impulse withstand voltage U | 0.8 kV |
Overvoltage category | III |
Degree of pollution to VDE 0100 | 3 |
Electrical data - AS Interface
AS-i Operating voltage, minimum | 18 VDC |
AS-i Operating voltage AS-i maximum | 31.6 VDC |
Note (AS-i Operating voltage) | Protection against polarity reversal |
AS-i Current consumption, maximum | 50 mA |
Electrical data - AS-Interface specification
AS-i Specification | Safety-Slave |
AS-i Version | V 2.1 |
AS-i Profile | S-0.B.F.E |
AS-i, IO-Code | 0x0 |
AS-i, ID-Code | 0xB |
AS-i, ID-Code1 | 0xF |
AS-i, ID-Code2 | 0xE |
AS-i Input, Channel 1 | Data bits DI 0 / DI 1 = dynamic code transmission |
AS-i Input, Channel 2 | Data bits DI 2 / DI 3 = dynamic code transmission |
AS-i Outputs, DO 0 … DO 3 | No Function |
AS-i Parameter bits, P0 ... P3 | No function |
Note (AS-i Parameter bits) | Set the parameter outputs to "1111" (0xF) FID: periphery error |
AS-i Input module address | 0 |
Note (AS-i Input module address) | Preset to address 0, can be changed through AS-interface bus master or hand-held programming device |
Status indication
Note (LED switching conditions display) | (1) LED yellow: Channel 1 / AS-i SaW Bit 0.1 (2) LED green/red (AS-i duo LED): Supply voltage / communication error / slave address = 0 / periphery error detected (3) LED yellow: Channel 2 / AS-i SaW Bit 2.3 |
Pin assignment
PIN 1 | AS-i + |
PIN 2 | n.c. |
PIN 3 | AS-Interface - |
PIN 4 | n.c. |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Operating instructions and Declaration of conformity
BNS 16 AS version 02
UL Certificate
(397.9 kB, 08/01/2019)
TÜV certification
BNS 16 AS
SISTEMA-VDMA library
(109.5 kB, 11/11/2021)
TraceParts
SISTEMA