Productfeatures
- Pre-wired cable 7-pole
- Comfortable diagnostics through sensor LED and electronic signalling output
- Ex certified
- Thermoplastic enclosure
- Electronic contact-free, coded system
- Ø M18
- Misaligned actuation possible
- High repeat accuracy of the switching points
- Max. length of the sensor chain 200 m
- Early warning when operating near the limit of the sensor's hysteris range
- Self-monitoring series-wiring of 16 sensors
- 2 short-circuit proof PNP safety outputs
- Explosion protection for ATEX Zones 2 and 22
Data
Ordering data
Product type description | EX-CSS 8-180-2P+D-M-L-3G/D |
Article number (order number) | 101189302 |
EAN (European Article Number) | 4030661347158 |
eCl@ss number, version 9.0 | 27-27-24-01 |
eCl@ss number, version 11.0 | 27-27-24-01 |
ETIM number, version 7.0 | EC002714 |
ETIM number, version 6.0 | EC002714 |
Explosion protection
Explosion protection: regulations | EN 60079-0 EN 60079-15 EN 60079-31 |
Explosion protection zones | 22 2 |
Explosion protection category | 3D 3G |
Explosion protection designation | II 3G Ex nA IIB T6 Gc X II 3G Ex nA IIC T6 Gc X II 3D Ex tc IIIC T70°C Dc X |
General data
Working principle | inductive |
Housing construction form | Cylinder, thread |
Installation conditions (mechanical) | not flush |
Sensor topology | Sensor for series wiring |
Enclosure material | Glass-fibre, reinforced thermoplastic |
Active area | Glass-fibre, reinforced thermoplastic |
Material of the nuts | Glass-fibre, reinforced thermoplastic |
Gross weight | 135 g |
Reaction time, maximum | 30 ms |
Duration of risk, maximum | 30 ms |
General data - Features
Short circuit detection | Yes |
Cross-circuit detection | Yes |
Safety functions | Yes |
Integral system diagnostics, status | Yes |
Number of semi-conductor outputs with signaling function | 1 |
Number of fail-safe digital outputs | 2 |
Number of series-wiring of sensors | 16 |
Mechanical data
Hysteresis (Switching distance), maximum | 0.7 mm |
Repeat accuracy R R | 0.2 mm |
Impact energy, maximum | 2 J |
Tightening torque of nuts, maximum | 3 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance | 8 mm |
Assured switching distance "ON" S | 7 mm |
Assured switching distance "OFF" S | 10 mm |
Mechanical data - Connection technique
Type of connection | Cable |
Length of cable | 2 m |
Terminal connector, Output | 7-pole |
Wire cross-section | 0.25 mm |
Wire cross-section | 23 AWG |
Mechanical data - Dimensions
ISO thread of the sensor | M18 |
width across flats | 24 BK |
Length of sensor | 92 mm |
Ambient conditions
Degree of protection | IP65 IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +40 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +85 °C |
Resistance to vibration to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
Restistance to shock | 30 g / 11 ms |
Protection class | II |
Ambient conditions - Insulation values
Rated insulation voltage U | 32 VDC |
Rated impulse withstand voltage U | 0.8 kV |
Overvoltage category | III |
Degree of pollution to VDE 0100 | 3 |
Electrical data
Voltage type | DC (direct current) |
Operating voltage, minimum | 20.4 VDC |
Operating voltage, maximum | 26.4 VDC |
No-load supply current, maximum I | 50 mA |
Rated operating voltage | 24 VDC |
Operating current | 1,000 mA 500 mA |
Switching frequency, approx. | 3 Hz |
Electrical data - Safety digital outputs
Design of switching elements | p-type |
Voltage drop U | 0.5 V |
Leakage current I | 0.5 mA |
Voltage, Utilisation category DC-12 | 24 VDC |
Current, Utilisation category DC-12 | 0.5 A |
Voltage, Utilisation category DC-13 | 24 VDC |
Current, Utilisation category DC-13 | 0.5 A |
Electrical data - Digital Output
Design of switching elements | p-type |
Electrical data - Diagnostic outputs
Voltage drop U | 4 V |
Voltage, Utilisation category DC-12 | 24 VDC |
Current, Utilisation category DC-12 | 0.05 A |
Voltage, Utilisation category DC-13 | 24 VDC |
Current, Utilisation category DC-13 | 0.05 A |
Status indication
Note (LED switching conditions display) | Multi-coloured LED: Green, Red, Yellow |
Pin assignment
PIN 1 | A1 Ue Brown |
PIN 2 | Y2 Safety output 2 red |
PIN 3 | A2 GND Blue |
PIN 4 | Y1 Safety output 1 Black |
PIN 5 | X1 Safety input 1 violet |
PIN 6 | X2 Safety input 2 White |
PIN 7 | Signalling output Grey |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Scope of delivery of mounting material | 2x nuts M18 x 1 |
Accessory
Recommendation (actuator) | CST 180-1 CST 180-2 |
Operating instructions and Declaration of conformity
EX-CSS 180
Brochure
Explosion Protection Catalogue - ATEX
TraceParts