Productfeatures
- PROFIBUS Gateway SD-I-DP-V0-2 to convert serial diagnostic signals to the PROFIBUS DP protocol
- The PROFIBUS Gateway SD-I-DP-V0-2 is a PROFIBUS slave
- Protection class IP 10 device for control cabinet mounting, for standard DIN rails
Data
Ordering data
Product type description | SD-I-DP-V0-2 PROFIBUS-GATEWAY |
Article number (order number) | 101192805 |
EAN (European Article Number) | 4030661353951 |
eCl@ss number, version 9.0 | 27-23-02-08 |
eCl@ss number, version 11.0 | 27-23-02-06 |
eCl@ss number, version 12.0 | 27-23-02-06 |
ETIM number, version 7.0 | EC001099 |
ETIM number, version 6.0 | EC001099 |
General data
Gross weight | 120 g |
General data - Features
Integral system diagnostics, status | Yes |
Number of LEDs | 4 |
Mechanical data
Mounting | Snaps onto standard DIN rail to EN 60715 |
Mechanical data - Connection technique
Type of connection | Cage clamps |
Mechanical data - Dimensions
Width | 50 mm |
Height | 72 mm |
Depth | 97 mm |
Ambient conditions
Degree of protection of the enclosure | IP10 |
Ambient temperature, minimum | -5 °C |
Ambient temperature, maximum | +55 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +85 °C |
Resistance to vibration to EN 60068-2-6 | 5 ... 9 Hz, Amplitude 3.5 mm 9 ... 150 Hz, with 1 g |
Restistance to shock | 15 g / 11 ms |
Ambient conditions - Insulation values
Rated insulation voltage U | 32 V |
Rated impulse withstand voltage U | 0.5 kV |
Overvoltage category | II |
Degree of pollution to VDE 0110 | 2 |
Electrical data
Rated operating voltage | 24 VDC, - 15 % / + 20 % (stabilised PELV) |
Operating current | 250 mA |
Status indication
Note (LED switching conditions display) | ON permanent light green: supply voltage present PB Flashing signal: PROFIBUS initialisation PB Permanent light red: PROFIBUS error SD Flashing signal: = SD gateway initialisation SD Permanent light Red: = SD Gateway fault |
Other data
Note (applications) | Safety sensor Guard system |
Note
Note (General) | Detailed functions, see programming and configuration manual of the SD Gateway |
Wiring example
Note (Wiring diagram) | Serial diagnostics of series-wired safety sensors/solenoid interlocks Devices with serial diagnostic option: AZ 200, AZM 200, CSS 30S, CSS 34, MZM 100 |
Mounting and wiring instructions
SD-I-DP-V0-2
EC Declaration of conformity
SD-I-DP-V0-2
Info
SD-I-DP-V0-2
Brochure
Electronic Safety Sensors and Solenoid Interlocks