2616-1102/020-000 - PCB terminal block; Push-in CAGE CLAMP with operating lever; AWG 18 - 4; Pin spacing 10 mm; W pinning; 2-pole; side entry; gray
- Brand: Wago
- Product Code: 2616-1102/020-000
Description: PCB terminal blocks with Push-in CAGE CLAMP® connection and levers Push-in termination of solid and ferruled conductors Intuitive and tool-free operation Several clamping units can be held open simultaneously, simplifying the connection of multi-core cables Testing can be performed both parallel and perpendicular to conductor entry
Description: PCB terminal blocks with Push-in CAGE CLAMP® connection and levers Push-in termination of solid and ferruled conductors Intuitive and tool-free operation Several clamping units can be held open simultaneously, simplifying the connection of multi-core cables Testing can be performed both parallel and perpendicular to conductor entry
- Available Quantity: 0
$7.11
Electrical data
IEC Approvals
Ratings per | IEC/EN 60664-1 |
Rated voltage (III / 3) | 1000 |
Rated impulse voltage (III/3) | 8 |
Rated voltage (III/2) | 1000 |
Rated impulse voltage (III/2) | 8 |
Nominal voltage (II/2) | 1000 |
Rated surge voltage (II/2) | 8 |
Rated current | 76 |
Legend (ratings) | (III / 2) ≙ Overvoltage category III / Pollution degree 2 |
UL Approvals
Approvals per | UL 1059 |
Rated voltage UL (Use Group B) | 600 |
Rated current UL (Use Group B) | 66 |
Rated voltage UL (Use Group C) | 600 |
Rated current UL (Use Group C) | 66 |
CSA Approvals
Approvals per | CSA |
Rated voltage CSA (Use Group B) | 600 |
Rated current CSA (Use Group B) | 66 |
Rated voltage CSA (Use Group C) | 600 |
Rated current CSA (Use Group C) | 66 |
Notes
Variants: | Other pole numbers Direct marking Other colors Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/. |
Connection data
Total number of connection points | 2 |
Total number of potentials | 2 |
Number of connection types | 1 |
Number of levels | 1 |
Physical data
Pin spacing | 10 mm / 0.394 inches |
Width | 22.8 mm / 0.898 inches |
Height | 37.2 mm / 1.465 inches |
Height from the surface | 33.2 mm / 1.307 inches |
Depth | 32 mm / 1.26 inches |
Solder pin length | 4 |
Solder pin dimensions | 1.2 x 1.2 mm |
Drilled hole diameter with tolerance | 1.7 (+0.1) mm |
PCB contact
PCB Contact | THT |
Solder pin arrangement | over the entire terminal strip (staggered) |
Number of solder pins per potential | 3 |
Material data
Note (material data) | |
Color | gray |
Material group | I |
Insulation material | Polyamide (PA66) |
Flammability class per UL94 | V0 |
Clamping spring material | Chrome-nickel spring steel (CrNi) |
Contact material | Electrolytic copper (ECu) |
Contact plating | Tin |
Fire load | 0.19 |
Actuator color | orange |
Weight | 19.3 |
Environmental requirements
Limit temperature range | -60 … +105 °C |
Additional Information
Technical Section
CAD data
2D/3D Models 2616-1102/020-000
PCB Design
Symbol and Footprint 2616-1102/020-000
CAE data
ZUKEN Portal 2616-1102/020-000
Compliance Search
Environmental Product Compliance 2616-1102/020-000