2759-290/211-1000 - e!RUNTIME; IEC-60870-Slave; Single License; Online Activation
- Brand: Wago
- Product Code: 2759-290/211-1000
Description: Function: The parameters for communication per the IEC 60870 Protocol can be set with a configurator integrated into the e!COCKPIT Software. The configurator sets up IEC 60870 objects while configuring data exchange to the PLC application or I/O modules. Import and export functions in CSV format allow configured data to be transmitted to other engineering tools. With this license, the IEC 60870-5-101 and -104 Protocols can be activated on the slave, and the protocol -103 activated on the master only. This permits the creation of gateways that convert one protocol into another, e.g., allowing protection devices to be read out via IEC 60870-5-103 and data to be transmitted to the network control system via IEC 60870-5-104. The time on the telecontrol substation (slave) can be directly synchronized via either the IEC 60870 Protocol with object 103 or via (S)NTP. IEC 60870-5-101/-104 Information Objects can be used to monitor the direction of single, double and step messages – bit patterns, counter values, as well as normalized, scaled and floating-point measurement values can also be used. All information objects can be transmitted with or without a time stamp. This also applies to information objects in the control direction. An IEC 60870-5-104 Slave can simultaneously maintain up to four connections to the control system (master). Your Benefits: Use the PFC200 Controller as a telecontrol substation (slave) on an IEC 60870-5-101/-104 Control System (master). Process data from one or more IEC 60870-5-103 Protection Devices (slaves) with the PFC200 Controller (master). Create a gateway application to transfer data from IEC 60870-5-103 Protection Devices to an IEC 60870-5-101/-104 Control System. Use: Enter the license into e!COCKPIT, assign it to a device and load both the license and project into the controller. No other installation steps are required. Technical Data: See Section “Functionality of the WAGO Protocol Library according to IEC 60870-5-101, and -104” in Product Manual “Planning DNP3/IEC-60870 with the Telecontrol Configurator and e!COCKPIT.“
Description: Function: The parameters for communication per the IEC 60870 Protocol can be set with a configurator integrated into the e!COCKPIT Software. The configurator sets up IEC 60870 objects while configuring data exchange to the PLC application or I/O modules. Import and export functions in CSV format allow configured data to be transmitted to other engineering tools. With this license, the IEC 60870-5-101 and -104 Protocols can be activated on the slave, and the protocol -103 activated on the master only. This permits the creation of gateways that convert one protocol into another, e.g., allowing protection devices to be read out via IEC 60870-5-103 and data to be transmitted to the network control system via IEC 60870-5-104. The time on the telecontrol substation (slave) can be directly synchronized via either the IEC 60870 Protocol with object 103 or via (S)NTP. IEC 60870-5-101/-104 Information Objects can be used to monitor the direction of single, double and step messages – bit patterns, counter values, as well as normalized, scaled and floating-point measurement values can also be used. All information objects can be transmitted with or without a time stamp. This also applies to information objects in the control direction. An IEC 60870-5-104 Slave can simultaneously maintain up to four connections to the control system (master). Your Benefits: Use the PFC200 Controller as a telecontrol substation (slave) on an IEC 60870-5-101/-104 Control System (master). Process data from one or more IEC 60870-5-103 Protection Devices (slaves) with the PFC200 Controller (master). Create a gateway application to transfer data from IEC 60870-5-103 Protection Devices to an IEC 60870-5-101/-104 Control System. Use: Enter the license into e!COCKPIT, assign it to a device and load both the license and project into the controller. No other installation steps are required. Technical Data: See Section “Functionality of the WAGO Protocol Library according to IEC 60870-5-101, and -104” in Product Manual “Planning DNP3/IEC-60870 with the Telecontrol Configurator and e!COCKPIT.“
- Available Quantity: 0
$350.90
System requirements
Other required software | e!COCKPIT version: V1.7 |
Software data
Supported devices | 750-8210: PFC200; G2; 4ETH RS 750-8210/025-000: PFC200; G2; 4ETH RS; T 750-8210/040-000: PFC200; G2; 4ETH RS; XTR 750-8217: PFC200; G2; LTE 2ETH RS 750-8217/025-000: PFC200; G2; LTE 2ETH RS; T |
Delivery
Delivery type | License certificate via email (e!COCKPIT already contains the software itself) |
License type (note) | The single license allows installation on one controller. One license per controller is required. |
License type (note) (2) | A PC with both Internet connection and e!COCKPIT may be required for license activation. |
Manual
Configure IEC 60870
System Description
Software ‒ General Product Information
Compliance Search
Environmental Product Compliance 2759-290/211-1000