288-414 - Relay module with driven contacts; Nominal input voltage: 24 V AC/DC; 4 break and 4 make contacts; Limiting continuous current: 6 A; Module width: 64 mm; 2,50 mm²; gray
- Brand: Wago
- Product Code: 288-414
Description:
- Available Quantity: 0
$149.60
Technical data
Control circuit
Nominal input voltage UN | AC/DC 24 V |
Input voltage range | -15 … +20 % |
Nominal input current at UN | 26 mA |
Load circuit
Number of break/switch-off contacts | 4 |
Number of make/switch-on contacts | 4 |
Contact material (relay) | AgSnO2 |
Limiting continuous current | 6 A |
Inrush current (resistive) max. | (AC) 20 A |
Switching voltage (max.) | AC 250 V |
Switching power (resistive) max. | AC 1500 VA |
Recommended minimum load | 10 V / 10 mA |
Pull-in time (typ.) | 18 |
Drop-out time (typ.) | 21 |
Bounce time (typ.) | 4 |
Electrical life (NO; resistive load; 23 °C) | 100 x 103 switching operations |
Mechanical life | 10 x 106 switching operations |
Mechanical force-guided operation | Type B |
Safety and protection
Rated voltage | 250 |
Rated surge voltage | 2.5 |
Pollution degree | 2 |
Dielectric strength (control/load circuit) (AC, 1 min) | 2 kVrms |
Dielectric strength (open contact) (AC, 1 min) | 1.3 kVrms |
Dielectric strength (load/load circuit) (AC, 1 min) | 1.5 kVrms |
Notes
Note | If required, a ventilation hole can be made in the cover, reducing the protection type from IP67 to IP30. If an outer contact (20) should weld, then the forced operated inner contact (12) driven by the actuator remains open. The rotating armature remains free to move. The unaffected contact pairs can operate normally, (i. e. their function to make or break remains unaffected). If an inner contact should weld (12) then the movement of the rotating armature is blocked via the operator. Open contacts of all four contact pairs remain open. This arrangement corresponds to conventional, force-guided operation. |
Connection data
Connection technology | CAGE CLAMP® |
WAGO connector | WAGO 256 Series |
Solid conductor | 0.08 … 2.5 mm² / 28 … 12 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 12 AWG |
Strip length | 5 … 6 mm / 0.2 … 0.24 inch |
Physical data
Width | 63.5 mm / 2.5 inch |
Height | 85 mm / 3.346 inch |
Depth from upper-edge of DIN-rail | 40 mm / 1.575 inch |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | gray |
Flammability class per UL94 | V0 |
Fire load | 0.854 |
Weight | 147.5 |
Environmental requirements
Ambient temperature (operation at UN) | -40 … 70 °C |
Surrounding air temperature (storage) | -40 … +80 °C |
Processing temperature | -25 … +50 °C |
Standards and specifications
Standards/specifications | EN 60664-1 EN 50205 EN 61810-1 ESTI (SEV): 09.1133 UL 508: E120782 TÜV: 968/EZ 116.02/09 |
CAD data
2D/3D Models 288-414
CAE data
EPLAN Data Portal 288-414
WSCAD Universe 288-414
ZUKEN Portal 288-414
Compliance Search
Environmental Product Compliance 288-414