750-1516 - 8-channel digital output; 24 VDC; 0.5 A; Low-side switching; 2-conductor connection
- Brand: Wago
- Product Code: 750-1516
Description: This digital output module is a 2-wire device featuring eight channels in a width of just 12 mm (0.47 inch). It transmits binary control signals from the automation device to the connected actuators (e.g., magnetic valves, contactors, transmitters, relays or other electrical loads). The module features Push-in CAGE CLAMP® connections enabling solid conductors to be connected by simply pushing them in. A green LED indicates the signal state of each channel. Field and system levels are electrically isolated. An operating tool with a 2.5 mm blade (210-719) is required to open the Push-in CAGE CLAMP® connections.
Description: This digital output module is a 2-wire device featuring eight channels in a width of just 12 mm (0.47 inch). It transmits binary control signals from the automation device to the connected actuators (e.g., magnetic valves, contactors, transmitters, relays or other electrical loads). The module features Push-in CAGE CLAMP® connections enabling solid conductors to be connected by simply pushing them in. A green LED indicates the signal state of each channel. Field and system levels are electrically isolated. An operating tool with a 2.5 mm blade (210-719) is required to open the Push-in CAGE CLAMP® connections.
- Available Quantity: 0
$153.90
Technical data
Number of digital outputs | 8 |
Number of Channels | 8 |
Signal type | Voltage |
Signal type (voltage) | 24 VDC |
Actuator connection | 8 x (2-wire) |
Output characteristic | Low-side switching |
Output current per channel | 0.5 |
Output current | short-circuit-protected |
Switching frequency (max.) | 1 kHz |
Load type | Resistive, inductive, lamp load |
Output data width (internal) max. | 8 |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 20 |
Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Current consumption, field supply (module with no external load) | 8 |
Isolation | 500 V system/field |
Indicators | LED (1-8) green: Status DO 1 … DO 8 |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Current carrying capacity (power jumper contacts) | 10 |
Connection data
Connection technology: inputs / outputs | 16 x Push-in CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 1.5 mm² / 28 … 16 AWG |
Fine-stranded conductor | 0.25 … 1.5 mm² / 22 … 16 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inch |
Conductor type (1) | f-st |
Conductor type (2) | s |
Conductor type 1 | fine-stranded |
Conductor type 2 | solid |
Physical data
Width | 12 mm / 0.472 inch |
Height | 100 mm / 3.937 inch |
Depth | 69 mm / 2.717 inch |
Depth from upper-edge of DIN-rail | 61.8 mm / 2.433 inch |
Mechanical data
Mounting type | DIN-35 rail |
Pluggable connector | Fixed |
Material data
Color | - |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.824 |
Weight | 46 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-3, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
8-channel, 24VDC, 0.5A
System Manual Series 750/753
Bid Text
750-1516
750-1516
System Description
750/753 Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Use in Hazardous Environments
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAE data
ZUKEN Portal 750-1516
EPLAN Data Portal 750-1516
WSCAD Universe 750-1516
CAD data
2D/3D Models 750-1516
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-1516