750-343 - Fieldbus Coupler PROFIBUS DP; 12 MBd; ECO
- Brand: Wago
- Product Code: 750-343
Description: The ECO Fieldbus Coupler is designed for applications with a low data width in the process image. These are primarily applications that use digital process data or only low volumes of analog process data. The system supply is provided directly by the coupler. The field supply is provided via a separate supply module. When initializing, the coupler determines the nodes module structure and creates the process image of all inputs and outputs. In order to optimize addresses, I/O modules with a bit width smaller than eight are grouped in one byte. It is furthermore possible to deactivate I/O modules and to modify the image of the node according to the connected signals without having to modify the existing control application. The diagnostic concept is based on ID- and channel-related diagnostics according to EN 50170. This does away with the need for programming modules to evaluate manufacturer-specific diagnostic data.
Description: The ECO Fieldbus Coupler is designed for applications with a low data width in the process image. These are primarily applications that use digital process data or only low volumes of analog process data. The system supply is provided directly by the coupler. The field supply is provided via a separate supply module. When initializing, the coupler determines the nodes module structure and creates the process image of all inputs and outputs. In order to optimize addresses, I/O modules with a bit width smaller than eight are grouped in one byte. It is furthermore possible to deactivate I/O modules and to modify the image of the node according to the connected signals without having to modify the existing control application. The diagnostic concept is based on ID- and channel-related diagnostics according to EN 50170. This does away with the need for programming modules to evaluate manufacturer-specific diagnostic data.
- Available Quantity: 0
$441.30
Notes
Note | Note: Configuration files required (GSD)! |
Technical data
Communication | PROFIBUS |
Number of fieldbus nodes on master (max.) | 125 |
Number of I/O points | 6,000 |
Baud rate | 9.6 kBd … 12 MBd |
Bus segment length (max.) | 1200 m |
Transmission medium | Cu cable per EN 50170 |
Transmission time | typ. 1 ms (10 couplers; each 32 digital I/O and 12 Mbaud) max. 3.3 ms |
Number of modules per node (max.) | 63 |
Input and output process image (fieldbus) max. | 32 bytes/32 bytes |
Supply voltage (system) | 24 VDC (-25 … +30 %); via pluggable connector |
Current consumption (5 V system supply) | 350 |
Total current (system supply) | 650 |
Input current (typ.) at nominal load (24 V) | 260 |
Power supply efficiency (typ.) at nominal load (24 V) | 80 |
Standard | EN 50170 |
Connection data
Connection technology: communication/fieldbus | PROFIBUS: 1 x D-Sub 9 socket |
Connection technology: system supply | 4 x CAGE CLAMP® |
Connection technology: device configuration | 1 x Male connector; 4-pole |
Connection type 1 | System supply |
Solid conductor | 0.08 … 1.5 mm² / 28 … 16 AWG |
Fine-stranded conductor | 0.08 … 1.5 mm² / 28 … 16 AWG |
Strip length | 5 … 6 mm / 0.2 … 0.24 inches |
Note (conductor cross-section) | 14 AWG: THHN, THWN |
Physical data
Width | 49.5 mm / 1.949 inches |
Height | 96.8 mm / 3.811 inches |
Depth | 71.9 mm / 2.831 inches |
Depth from upper-edge of DIN-rail | 64.7 mm / 2.547 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 2.278 |
Weight | 110.4 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-4, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
PROFIBUS DP Fieldbus Coupler
System Manual Series 750/753
Bid Text
750-343
750-343
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
750/753 Series I/O-System ‒ General Product Information
Use in Hazardous Environments
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Firmware
0750-0343, Feldbuskoppler PROFIBUS DP
CAD data
2D/3D Models 750-343
CAE data
WSCAD Universe 750-343
ZUKEN Portal 750-343
EPLAN Data Portal 750-343
Device Description File
750-910; GSD files for PROFIBUS / 750, 752, 755, 758 and 767 Series
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-343