750-606 - Power Supply; 24 VDC; Diagnostics; Intrinsically safe
- Brand: Wago
- Product Code: 750-606
Description: This supply module powers all intrinsically safe 750 Series Ex i Modules. It also monitors the power supply to the downstream Ex i segment and separates the intrinsically safe from the non-intrinsically safe section of the WAGO I/O System 750. The input and output sides are electrically isolated from each other. The maximum current provided by the supply module is 1.0 A. When configuring the Ex i segment, the total current must not be exceeded. In the event of a short circuit or overload, electronic monitoring automatically switches off the output voltage. After eliminating the fault, the output voltage is reactivated within approximately ten seconds. If, due to load conditions, more than one supply module is required per station, four distance modules (750‐616) must be placed between the intrinsically safe sections.Indicators: Green LED (input voltage) Green/red LED (output voltage available/not available)
Description: This supply module powers all intrinsically safe 750 Series Ex i Modules. It also monitors the power supply to the downstream Ex i segment and separates the intrinsically safe from the non-intrinsically safe section of the WAGO I/O System 750. The input and output sides are electrically isolated from each other. The maximum current provided by the supply module is 1.0 A. When configuring the Ex i segment, the total current must not be exceeded. In the event of a short circuit or overload, electronic monitoring automatically switches off the output voltage. After eliminating the fault, the output voltage is reactivated within approximately ten seconds. If, due to load conditions, more than one supply module is required per station, four distance modules (750‐616) must be placed between the intrinsically safe sections.Indicators: Green LED (input voltage) Green/red LED (output voltage available/not available)
- Available Quantity: 0
$929.50
Notes
Note | General information (e.g., installation regulations) on explosion protection is available in the WAGO I/O System 750 manuals! |
Technical data
Input voltage (note) | 24 VDC (−25 % … +30 %) |
Diagnostics | Input voltage failure, fuse triggered |
Fuse | electronic |
Power consumption Pmax. | 29 W |
Data width | 2 bits (input voltage failure, fuse triggered) |
Intrinsic safety Ex i | yes |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 7.5 |
Supply voltage (field) | 24 VDC (-25 … +30 %); (Adjacent Ex i modules are supplied with UO = max. 27.3 V); via power jumper contacts (power supply via CAGE CLAMP® connection; transmission via spring contact) |
Power loss Pl | < 5 W |
Number of outgoing power jumper contacts | 2 |
Current carrying capacity (power jumper contacts) | 1 |
Marking | ATEX/IECEx: II 3G Ex ec IIC T4 Gc |
Explosion protection
Ex standard | EN IEC 60079-0, -7, -11 |
Power supply (output) | Uo = 26.8 V (safe voltage per IEC 60079-11, protection level ia); Un = 24 V ± 0.3 V, In = 1 A |
Power supply (input) | Un = 24 VDC (-25 … +30 %); Pmax. = 29 W; Um = 253 V |
Connection data
Connection technology: field supply | 2 x CAGE CLAMP® |
Connection type 1 | Field supply |
Solid conductor | 0.08 … 1.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 1.5 mm² / 28 … 14 AWG |
Strip length | 5 … 6 mm / 0.2 … 0.24 inches |
Physical data
Width | 48 mm / 1.89 inches |
Height | 100 mm / 3.937 inches |
Depth | 70.9 mm / 2.791 inches |
Depth from upper-edge of DIN-rail | 63.7 mm / 2.508 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 2.544 |
Weight | 167.5 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-3, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Data sheet
750-606, 24VDC 1.0A Ex i Power Supply, data sheet
Manual
System Manual WAGO I/O System 750 / 753
24VDC 1.0A Ex i power supply
System Manual Series 750/753
Bid Text
750-606
750-606
System Description
750/753 Series I/O-System ‒ General Product Information
Use in Hazardous Environments
Overview on WAGO-I/O-SYSTEM 750 approvals
Ex i Overview
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAE data
WSCAD Universe 750-606
ZUKEN Portal 750-606
EPLAN Data Portal 750-606
CAD data
2D/3D Models 750-606
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857