750-611 - Power Supply; 230 VAC; fuse holder; Diagnostics
- Brand: Wago
- Product Code: 750-611
Description: This supply module provides the I/O modules with the corresponding supply potential. The maximum current provided by the supply module is 6.3 A. When configuring the system, the total current must not be exceeded. Should higher currents be necessary, an intermediate supply module must be added to the assembly. This module is fuse-protected (5 x 20 mm). The fuse can be changed quickly, with ease, from the retractable fuse carrier. A blown fuse and the status of the supply voltage are indicated via LEDs. The I/O module sends information about the status of the supply module to the fieldbus coupler through two input bits. One bit is for the status of the fuse. The other bit is for the status of the supply voltage
Description: This supply module provides the I/O modules with the corresponding supply potential. The maximum current provided by the supply module is 6.3 A. When configuring the system, the total current must not be exceeded. Should higher currents be necessary, an intermediate supply module must be added to the assembly. This module is fuse-protected (5 x 20 mm). The fuse can be changed quickly, with ease, from the retractable fuse carrier. A blown fuse and the status of the supply voltage are indicated via LEDs. The I/O module sends information about the status of the supply module to the fieldbus coupler through two input bits. One bit is for the status of the fuse. The other bit is for the status of the supply voltage
- Available Quantity: 0
$117.30
Technical data
Signal type | Voltage |
Signal type (voltage) | 230 VAC |
Diagnostics | Supply voltage (field): Detection “on” at > 164 VAC; Detection “off” at < 40 VAC |
Fuse | 5 x 20; T 6.3 A (not included) |
Data width | 2 bits (1 bit current monitoring, 1 bit fuse fault) |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 5 |
Supply voltage (field) | 230 VAC (-15 … +10 %); via power jumper contacts (power supply via CAGE CLAMP® connection; transmission via spring contact) |
Number of outgoing power jumper contacts | 3 |
Current carrying capacity (power jumper contacts) | 6.3 |
Connection data
Connection technology: field supply | 6 x CAGE CLAMP® |
Connection type 1 | Field supply |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69.8 mm / 2.748 inches |
Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 1.982 |
Weight | 51 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-4, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
230VAC, max. 6.3A
System Manual Series 750/753
Bid Text
750-611
750-611
ausschreiben.de 750-611
System Description
750/753 Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Use in Hazardous Environments
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 750-611
CAE data
EPLAN Data Portal 750-611
WSCAD Universe 750-611
ZUKEN Portal 750-611
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-611