750-661/000-004 - Fail-safe 4-channel digital input; 24 VDC; PROFIsafe
- Brand: Wago
- Product Code: 750-661/000-004
Description: The PROFIsafe module 75x-661/000-004 can connect to potential-free emergency stop buttons with contacts, safety interlock switches, operating mode switches, safety sensors and semiconductor outputs. The module is equipped with 4 clock sensitive inputs (I1 … I4) that are fed by 2 differently clocked outputs (T1 … T2). Clock outputs are short-circuit protected. Inputs are continually monitored for cross circuits and voltage supply from separate sources. Additional safety relevant parameters (e.g., operating modes, switching off test pulses, discrepancy or filter times) can be configured via WAGO-I/O-CHECK. The configuration tool can be conveniently integrated into engineering systems supporting both CC2 and CC3 tool calling interfaces (TCI). When exchanging modules, parameters are automatically downloaded into the control unit via PROFIsafe-compatible iPar server – depending on settings. The PROFIsafe address can be set using the DIP switch located on the side of the module, or via WAGO-I/O-CHECK. The module supports the PROFIsafe V2.6 (PROFINET) protocol. Field and system level are galvanically separated from each other. Individual I/O modules can be arranged in any combination when configuring the fieldbus node. If necessary (e.g. cable length of the 24V supply greater than 3 meters), a WAGO filter module or an appropriate external filter must be used for the 24 V power supply to protect the module against surge and burst (per IEC 61000-6-7 and marine applications). Additional information can be found in the product manual (available in German and English). The module 75x-661/000-004 has been evaluated by UL in accordance with the standards UL/CSA 61010-1, UL/CSA 61010-2-201 and UL 121201, CSA-C22.2 No. 213. Functional safety evaluations according to the specified standards were carried out by TÜV Rheinland.
Description: The PROFIsafe module 75x-661/000-004 can connect to potential-free emergency stop buttons with contacts, safety interlock switches, operating mode switches, safety sensors and semiconductor outputs. The module is equipped with 4 clock sensitive inputs (I1 … I4) that are fed by 2 differently clocked outputs (T1 … T2). Clock outputs are short-circuit protected. Inputs are continually monitored for cross circuits and voltage supply from separate sources. Additional safety relevant parameters (e.g., operating modes, switching off test pulses, discrepancy or filter times) can be configured via WAGO-I/O-CHECK. The configuration tool can be conveniently integrated into engineering systems supporting both CC2 and CC3 tool calling interfaces (TCI). When exchanging modules, parameters are automatically downloaded into the control unit via PROFIsafe-compatible iPar server – depending on settings. The PROFIsafe address can be set using the DIP switch located on the side of the module, or via WAGO-I/O-CHECK. The module supports the PROFIsafe V2.6 (PROFINET) protocol. Field and system level are galvanically separated from each other. Individual I/O modules can be arranged in any combination when configuring the fieldbus node. If necessary (e.g. cable length of the 24V supply greater than 3 meters), a WAGO filter module or an appropriate external filter must be used for the 24 V power supply to protect the module against surge and burst (per IEC 61000-6-7 and marine applications). Additional information can be found in the product manual (available in German and English). The module 75x-661/000-004 has been evaluated by UL in accordance with the standards UL/CSA 61010-1, UL/CSA 61010-2-201 and UL 121201, CSA-C22.2 No. 213. Functional safety evaluations according to the specified standards were carried out by TÜV Rheinland.
- Available Quantity: 0
$541.90
Technical data
Number of digital inputs | 4 |
Number of Channels | 4 |
Signal type | Voltage |
Signal type (voltage) | 24 VDC |
Input characteristic | Clock sensitive |
Input characteristic | Type 1 per IEC 61131 |
Input current per channel for signal (1) typ. | 3 |
Output current per channel | 0.1 |
Signal frequency (max.) | 50 |
Configuration options | PROFIsafe address adjustable via DIP switch or engineering software |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 120 |
Supply voltage (field) | 24 VSELV/PELV DC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Current consumption, field supply (module with no external load) | 25 |
Indicators | LED (A-D) green/red: Status/Error I1 … I4; LED (E) red: Group error; LED (F-H) green/red: Diagnostics |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Current carrying capacity (power jumper contacts) | 10 |
Functional safety
Achievable safety classes | SIL 3; Category 4, PLe (two-channel); SIL 2; Category 2; PLd (one-channel) |
Safety standards | IEC 61508-1 … -7; EN ISO 13849-1; EN 62061 |
Interface types according to ZVEI (inputs) | Drain; A, C0, C1, C2, C3 |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inch |
Physical data
Width | 12 mm / 0.472 inch |
Height | 100 mm / 3.937 inch |
Depth | 67.8 mm / 2.669 inch |
Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inch |
Mechanical data
Mounting type | DIN-35 rail |
Pluggable connector | Fixed |
Material data
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.934 |
Weight | 50.2 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | Horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | Per EN 61000-6-2, marine applications, EN 61000-6-7 (FS) |
EMC emission of interference | Per EN 61000-6-3, -4; marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Data sheet
Manual
4FDI 24V PROFIsafe
System Description
Position Paper CB24I of the German Electrical and Electronic Manufacturer’s Association (ZVEI)
Functional Safety ‒ General Product Information
750/753 Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Additional Information
Disposal; Electrical and electronic equipment, Packaging
SISTEMA library
SISTEMA-Bibliothek
VDMA-Bibliothek
Library
Configuration and Commissioning Software
Safety Editor (SEDI) / 750-66x
CAD data
2D/3D Models 750-661/000-004
Compliance Search