750-671 - Stepper Controller; 24 VDC; 1.5 A
- Brand: Wago
- Product Code: 750-671
Description: The 750-671 Module is an intelligent stepper controller with an on-board power driver designed to control two-phase stepper motors up to 24 V/1.5 A. The 64 times microstepping prevents step losses due to resonance in the acceleration phases and reduces wear on the mechanical parts. Adjustable current limits for stop, acceleration and constant speed help minimize motor power dissipation. Two configurable inputs for start/stop, limit switches, reference cams, jog/tip, etc., are directly processed by the internal software without delay. Versatile functions, such as positioning with different acceleration slopes, command tables, camshaft controller, auto referencing and other event-dependent properties provide this controller with a wide spectrum of possible uses. The programmers interface is the same for all WAGO Stepper Controllers.
Description: The 750-671 Module is an intelligent stepper controller with an on-board power driver designed to control two-phase stepper motors up to 24 V/1.5 A. The 64 times microstepping prevents step losses due to resonance in the acceleration phases and reduces wear on the mechanical parts. Adjustable current limits for stop, acceleration and constant speed help minimize motor power dissipation. Two configurable inputs for start/stop, limit switches, reference cams, jog/tip, etc., are directly processed by the internal software without delay. Versatile functions, such as positioning with different acceleration slopes, command tables, camshaft controller, auto referencing and other event-dependent properties provide this controller with a wide spectrum of possible uses. The programmers interface is the same for all WAGO Stepper Controllers.
- Available Quantity: 0
$496.20
Technical data
Device-specific | Operating modes: Individual positioning, reference run, jog, tip, command tables |
Number of digital inputs | 2 |
Number of outputs | 1 stepper motor (2 phases/bipolar) |
Input filter | 100 µs, software filter can be connected |
Input current (typ.) | 2.8 mA |
Output current (max.) (motor) | Up to 2 x 1.5 A peak value; 1 A rms |
Voltage range for signal (0) | −3 … +5 VDC |
Voltage range for signal (1) | 15 … 30 VDC |
Resolution | 15 bits + 16 bit prescaler |
Stepper resolution | 23 bits + sign bit |
Stepper frequency (full-step) max. | 7,812 |
Microstepping | 64 steps |
Data width | 12-byte input/output |
Functions | Absolute/relative positioning, setpoint change on the fly, rotary axis, etc. |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 85 |
Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Isolation | 500 V system/field |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 67.8 mm / 2.669 inches |
Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.952 |
Weight | 51.8 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-3 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
Stepper controller 24V / 1.5A
System Manual Series 750/753
Bid Text
750-671
750-671
Additional Information
Disposal; Electrical and electronic equipment, Packaging
System Description
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Application Note CoDeSys 2.3
Nutzung der Bibliothek Stepper_02 für die Module 750-670,750-671 (a114900)
Application Note e!COCKPIT
e!COCKPIT Application Note WagoAppStepper
Application note SIEMENS
Using stepper modules with TIA Portal (a114904)
Benutzung der Stepper Module 750-670,750-671,750-672,750-673 mit Siemens Step 7 (a114903)
Library
Stepper_03.lib
Function blocks for the stepper modules 750-670 and 750-671
CAD data
2D/3D Models 750-671
CAE data
WSCAD Universe 750-671
ZUKEN Portal 750-671
EPLAN Data Portal 750-671
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-671