750-806 - Controller DeviceNet

Note

Note: Configuration files required (EDS)!

The EDS files can be downloaded for free at www.wago.com.

Communication

DeviceNet

Visualization

none

CPU

16 bits

Programming languages per IEC 61131-3

Instruction List (IL)

Ladder Diagram (LD)

Function Block Diagram (FBD), Continuous Function Chart (CFC)

Structured Text (ST)

Sequential Function Chart (SFC)

Programming environment

WAGO-I/O-PRO V2.3 (based on CODESYS V2.3)

Configuration options

EDS device description file

WAGO-I/O-CHECK

Cycle time

< 3 ms for 1000 bit instructions/ 256 digital I/O

Baud rate

500 kBd (125 kBd, 250 kBd, 500 kBd)

Bus segment length (max.)

500 m

Transmission medium (communication/fieldbus)

Shielded Cu cable; Remote bus cable: 2 x 0.82 mm² + 2 x 1.7 mm²; Drop cable: 2 x 0.2 mm² + 2 x 0.32 mm²

Number of fieldbus nodes on master (max.)

64

Number of I/O points

6,000

Program memory

128 KB

Data memory

64 KB

Non-volatile software memory

8

Memory for fieldbus input variables (max.)

512

Memory for fieldbus output variables (max.)

512

Number of modules per node (max.)

64

Input and output process image (fieldbus) max.

1024 bytes/1024 bytes

DeviceNet features

Polled I/O message connection

Strobed I/O message connection

Change of state

Cyclic message connection

UCMM using function blocks

DeviceNet master can be programmed

Indicators

LED (OVERF) red: device error; LED (RUN) green: Device status; LED (BUS OFF) red: Network error ; LED (CONNECT) green: Network status; LED (I/O, USR) red/green/orange: Local data bus status, status programmable by user; LED (A, B) green: System power supply status, field supply

Supply voltage (system)

24 VDC (-25 … +30 %); via pluggable connector (CAGE CLAMP^® connection)

Input current via DeviceNet interface at 11 V

120

Input current (typ.) at nominal load (24 V)

500

Power supply efficiency (typ.) at nominal load (24 V)

87

Current consumption (5 V system supply)

350

Total current (system supply)

1,650

Supply voltage (field)

24 VDC (-25 … +30 %); via power jumper contacts

Current carrying capacity (power jumper contacts)

10

Number of outgoing power jumper contacts

3

Isolation

500 V system/field

Connection technology: communication/fieldbus

DeviceNet: 1 x Male connector; 5-pole

Connection technology: system supply

2 x CAGE CLAMP^®

Connection technology: field supply

6 x CAGE CLAMP^®

Connection type 1

System/field supply

Solid conductor

0.08 … 2.5 mm² / 28 … 14 AWG

Fine-stranded conductor

0.08 … 2.5 mm² / 28 … 14 AWG

Strip length

8 … 9 mm / 0.31 … 0.35 inches

Connection technology: device configuration

1 x Male connector; 4-pole

Width

50.5 mm / 1.988 inches

Height

100 mm / 3.937 inches

Depth

71.1 mm / 2.799 inches

Depth from upper-edge of DIN-rail

63.9 mm / 2.516 inches

Weight

200

Color

light gray

Housing material

Polycarbonate; polyamide 6.6

Conformity marking

CE

Ambient temperature (operation)

0 … +55 °C

Surrounding air temperature (storage)

-25 … +85 °C

Protection type

IP20

Pollution degree (5)

2 per IEC 61131-2

Operating altitude

without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.)

Relative humidity (without condensation)

95

Mounting position

any

Mounting type

DIN-35 rail

Vibration resistance

4g per IEC 60068-2-6

Shock resistance

15g per IEC 60068-2-27

EMC immunity to interference

per EN 61000-6-2, marine applications

EMC emission of interference

per EN 61000-6-4, marine applications

Exposure to pollutants

Per IEC 60068-2-42 and IEC 60068-2-43

Fire load

2.797

Permissible pollutant concentration H₂S at a relative humidity < 75%

10

Permissible pollutant concentration SO ₂ at a relative humidity < 75%

25