750-889 - Controller KNX IP
- Brand: Wago
- Product Code: 750-889
Description: This controller can accommodate up to two KNX logic devices at the same time. 1. In conjunction with the WAGO I/O System, the KNX IP Controller is used as a user-programmable application controller within KNX IP networks. The controller supports all digital, analog and specialty modules found within the 750/753 Series. The IEC 61131-3 programmable controller is capable of 10/100 Mbit/s data rates. KNX objects of any type (EIS/DPT) can be created using the programming tool. Libraries including pre-made function blocks are readily available on the WAGO Website for programming. The controller supports a maximum of 253 communication objects, as well as 254 group addresses and associations. 2. Combined with the KNX/EIB/TP1 Module, the 750‐889 KNX IP Controller operates as a router on an IP backbone (ETHERNET). No IEC application is required for router functionality. Both devices are commissioned and configured via ETS software using the WAGO product database. The software includes a plug‐in that automatically installs and opens for configuration. The KNX IP Controller features an integrated 2‐port 10/100 Mbit/s switch, allowing a line structure to be easily created without additional network components. The maximum number of controllers that can be wired in series is 20. An internal server is available for Web-based applications. The controller provides 1024 KB program memory, 1024 KB data memory and 32 KB retain memory. It is capable of multitasking, has a battery-backed, real-time clock and is based on a 32-bit CPU. The controller offers many different application protocols for control tasks (MODBUS, KNXnet/IP) or for system management and diagnostics (HTTP, BootP, DHCP, DNS, AutoIP, SNTP, FTP, SNMP and SMTP). The number of KNX/EIB/TP1 Modules (750‐646) supported by the KNX IP Controller does not depend on the application.
Description: This controller can accommodate up to two KNX logic devices at the same time. 1. In conjunction with the WAGO I/O System, the KNX IP Controller is used as a user-programmable application controller within KNX IP networks. The controller supports all digital, analog and specialty modules found within the 750/753 Series. The IEC 61131-3 programmable controller is capable of 10/100 Mbit/s data rates. KNX objects of any type (EIS/DPT) can be created using the programming tool. Libraries including pre-made function blocks are readily available on the WAGO Website for programming. The controller supports a maximum of 253 communication objects, as well as 254 group addresses and associations. 2. Combined with the KNX/EIB/TP1 Module, the 750‐889 KNX IP Controller operates as a router on an IP backbone (ETHERNET). No IEC application is required for router functionality. Both devices are commissioned and configured via ETS software using the WAGO product database. The software includes a plug‐in that automatically installs and opens for configuration. The KNX IP Controller features an integrated 2‐port 10/100 Mbit/s switch, allowing a line structure to be easily created without additional network components. The maximum number of controllers that can be wired in series is 20. An internal server is available for Web-based applications. The controller provides 1024 KB program memory, 1024 KB data memory and 32 KB retain memory. It is capable of multitasking, has a battery-backed, real-time clock and is based on a 32-bit CPU. The controller offers many different application protocols for control tasks (MODBUS, KNXnet/IP) or for system management and diagnostics (HTTP, BootP, DHCP, DNS, AutoIP, SNTP, FTP, SNMP and SMTP). The number of KNX/EIB/TP1 Modules (750‐646) supported by the KNX IP Controller does not depend on the application.
Notes
Note | The WAGO ETS3/4 plug-in is a component of the WAGO-ETS3 product databank and can be downloaded for free at www.wago.com. |
Technical data
Communication | KNX IP Modbus (TCP, UDP) ETHERNET |
ETHERNET protocols | HTTP BootP DHCP DNS AutoIP SNTP FTP SNMP V3 SMTP |
Visualization | Web-Visu |
CPU | 32 bits |
Programming languages per IEC 61131-3 | Instruction List (IL) Ladder Diagram (LD) Function Block Diagram (FBD), Continuous Function Chart (CFC) Structured Text (ST) Sequential Function Chart (SFC) |
Programming environment | WAGO-I/O-PRO V2.3 (based on CODESYS V2.3) |
Configuration options | WAGO-I/O-CHECK Web-Based Management |
Device specification | KNX/TP1 bus specification: 1.0 |
Network length (max.) | ≤ 2000 m; max. 20 controllers in series |
Baud rate (communication/fieldbus 1) | 10/100 Mbit/s |
Baud rate | 10/100 Mbit/s |
Bus segment length (max.) | 100 m |
Transmission medium (communication/fieldbus) | S-UTP; 100 Ω; Cat. 5 |
Program memory | 1024 KB |
Data memory | 1024 KB |
Non-volatile software memory | 32 |
Memory for fieldbus input variables (max.) | 512 |
Memory for fieldbus output variables (max.) | 512 |
Type of memory card | SD card |
Memory card slot | Push-push mechanism; Cover lid (sealable) |
Number of modules per node (max.) | 250 |
Number of modules without a bus extension (max.) | 64 |
Input and output process image (fieldbus) max. | 1020 Worte/1020 Worte |
Device-specific | Number of group addresses: 254; Number of communication objects: 253 |
Indicators | LED (LINK/ACT) green: Network connection via ports 1 … 2; LED (MS/PRG IP, NS/PRG RT) red/green: IP device programming mode, router; LED (I/O, USR) red/green/orange: Local data bus status, status programmable by user; LED (A, B) green: System power supply status, field supply |
Supply voltage (system) | 24 VDC (-25 … +30 %); via pluggable connector (CAGE CLAMP® connection) |
Input current (typ.) at nominal load (24 V) | 500 |
Power supply efficiency (typ.) at nominal load (24 V) | 90 |
Current consumption (5 V system supply) | 450 |
Total current (system supply) | 1,700 |
Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts |
Current carrying capacity (power jumper contacts) | 10 |
Number of outgoing power jumper contacts | 3 |
Isolation | 500 V system/field |
KNX certified | IP Controller: 61/8316/08; IP Router: 61/8317/08 |
Connection data
Connection technology: communication/fieldbus | KNX IP: 2 x RJ-45; Modbus TCP/UDP: 2 x RJ-45 |
Connection technology: system supply | 2 x CAGE CLAMP® |
Connection technology: field supply | 6 x CAGE CLAMP® |
Connection type 1 | System/field supply |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Connection technology: device configuration | 1 x Male connector; 4-pole |
Physical data
Width | 61.5 mm / 2.421 inches |
Height | 100 mm / 3.937 inches |
Depth | 71.9 mm / 2.831 inches |
Depth from upper-edge of DIN-rail | 64.7 mm / 2.547 inches |
Mechanical data
Weight | 192 |
Color | gray |
Housing material | Polycarbonate; polyamide 6.6 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.) |
Relative humidity (without condensation) | 95 |
Mounting position | any |
Mounting type | DIN-35 rail |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-3 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Fire load | 2.802 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
KNX IP Controller
WAGO ETS Plug-in (Product Data Base)
System Manual Series 750/753
Bid Text
750-889
750-889
ausschreiben.de 750-889
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
Use in Hazardous Environments
750 Controller, General Product Information
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Application Note CoDeSys 2.3
Application Note: MpBus_03 Library
KNX Function Macros
Application note: DALI 753-647 Configuration Interface
Connection of Thermokon Multi-function room control units WRF 08
Connection of Thermokon Multi-function room control units WRF 06
HART Tool Routing via ETHERNET with
750-820x/750-88x and CODESYS 2.3 (a116120)HVAC System Macros
Anbindung der HKW-Elektronik Wetterprognose-Station WS-K xx T ModBus
Application Note: DMX_02
GRUNDFOS GENIbus interface, application note
Application Note: EnOcean_06 Library
Application Note Library ModuleAccess_01
Application Note flexROOM® Weather Decoder
HLK-Anlagenmakros für TRIC
Application Note KNX StarterKit3
Application Note for the 750-494 3-Phase Power Measurement Module
Application Note for the 750-495 3-Phase Power Measurement Module
Connection of a Thermokon Thanos SR L MODBUS room control unit to the WAGO-I/O-SYSTEM
Connection of DMX devices to the WAGO-I/O-SYSTEM via the ArtNet-DMX STAGE-PROFI 1.1
Application Note PowerMeasurement_03 Library
Application Note DaylightSaving
Application Note Connecting with an iPod Touch
Application Note Weather Station Elsner P03 Modbus
Application Note Scheduler_03.lib
Library
WAGO_Datalogger_02.lib
ModuleAccess_01.lib
Product database
WAGO product database for KNX IP Controller 750-889 / 750-849
WAGO product database for KNX Router 750-889 / 750-849 + 753-646
Configuration and Commissioning Software
WAGO-IO-PRO Demo-Version (759-912) / Serie 750, 758 und 762
WAGOupload
Firmware
0750-0889, Controller KNX IP
CAD data
2D/3D Models 750-889
CAE data
EPLAN Data Portal 750-889
WSCAD Universe 750-889
ZUKEN Portal 750-889
Compliance Search
Environmental Product Compliance 750-889