753-540 - 4-channel digital output; 230 VAC; 0.25 A; Solid-state
- Brand: Wago
- Product Code: 753-540
Description: This digital output module transmits control signals from the automation device to the connected actuators. The module has four output channels and eight actuators may be connected to it. The signal state of the outputs is shown by an LED. Field and system levels are electrically isolated.Notice: An additional supply module must be added for 120 (230) VAC supply!
Description: This digital output module transmits control signals from the automation device to the connected actuators. The module has four output channels and eight actuators may be connected to it. The signal state of the outputs is shown by an LED. Field and system levels are electrically isolated.Notice: An additional supply module must be added for 120 (230) VAC supply!
- Available Quantity: 2
$238.10
Notes
Note | Pluggable connectors and coding fingers (753 Series) are not included. |
Technical data
Number of digital outputs | 4 |
Number of Channels | 4 |
Signal type | Voltage |
Signal type (voltage) | 5 … 250 VAC |
Actuator connection | 4 x (2-wire) |
Output characteristic | high-side switching |
Output current per channel | 0.25 |
Output current | short-circuit-protected |
Protection against incorrect wiring | Overvoltage protection (275 V) via varistor |
Load type | resistive, inductive |
Short-circuit current | max. 10 A (16 ms) |
ON voltage difference L-DO (max.) | 1.2 |
Pull-in time (max.) | 10 |
Drop-out time (max.) | 10 |
Output data width (internal) max. | 4 |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 18 |
Supply voltage (field) | 230 VAC; via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Isolation | 1500 V (system/field) |
Indicators | LED (A-D) green: Status DO 1 … DO 4 |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Current carrying capacity (power jumper contacts) | 10 |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69.8 mm / 2.748 inches |
Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inches |
Mechanical data
Mounting type | DIN-35 rail |
Pluggable connector | Pluggable |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.868 |
Weight | 41.4 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-4 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
4-channel, 120/230VAC 0.25A
System Manual Series 750/753
Bid Text
753-540
753-540
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
750/753 Series I/O-System ‒ General Product Information
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 753-540
CAE data
ZUKEN Portal 753-540
EPLAN Data Portal 753-540
WSCAD Universe 753-540
Compliance Search
Environmental Product Compliance 753-540