753-652 - RS-232/485 Serial Interface
- Brand: Wago
- Product Code: 753-652
Description: This serial interface module connects RS‐485/-422 or RS-232 C interface devices to the WAGO I/O System 750. It also provides gateways between the serial interface and the fieldbus systems supported by the WAGO I/O System 750. No higher protocol level is required by the module. Communication to the associated fieldbus master is completely transparent, which provides a wide range of applications for the serial interface module. If required, communication protocols can be configured via fieldbus master. The 2560-byte input buffer provides high data baud rates. At lower baud rates, the data received in lower priority tasks is evaluated without data loss. The 512-byte output buffer provides fast transmission of larger data strings. The module can be configured via WAGO-I/O-CHECK or GSD files. Both flexible baud rate and data width selection perfectly adapt to the application.
Description: This serial interface module connects RS‐485/-422 or RS-232 C interface devices to the WAGO I/O System 750. It also provides gateways between the serial interface and the fieldbus systems supported by the WAGO I/O System 750. No higher protocol level is required by the module. Communication to the associated fieldbus master is completely transparent, which provides a wide range of applications for the serial interface module. If required, communication protocols can be configured via fieldbus master. The 2560-byte input buffer provides high data baud rates. At lower baud rates, the data received in lower priority tasks is evaluated without data loss. The 512-byte output buffer provides fast transmission of larger data strings. The module can be configured via WAGO-I/O-CHECK or GSD files. Both flexible baud rate and data width selection perfectly adapt to the application.
Notes
Note | Pluggable connectors and coding fingers (753 Series) are not included. |
Technical data
Signal type | RS-232 RS-422 / RS-485 |
Baud rate | 300 Bd … 115.2 kBd |
Bit transfer | RS-485/-422: ISO 8482 / DIN 66259 - 4; RS-232: EIA/TIA-232-F |
Transmission channels | 1 TxD / 1 RxD, full-duplex, half-duplex |
Line length | RS-485/-422: approx. 1000 m (max.) twisted pair, RS-232: 40 m (max.) |
Data width | 1 x 46/1 x 22/1 x 6-byte input/output (parameterizable), 2-byte control/status |
Parity | None/Odd/Even |
Number of data bits | 7/8, adjustable |
Number of stop bits | 1/2, adjustable |
Buffer | 2560-byte input / 512-byte output |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 85 |
Supply voltage (field) | 24 VDC; via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Isolation | 500 V system/field |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69 mm / 2.717 inches |
Depth from upper-edge of DIN-rail | 61.8 mm / 2.433 inches |
Mechanical data
Mounting type | DIN-35 rail |
Pluggable connector | Pluggable |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.823 |
Weight | 42.1 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61131-2, marine applications |
EMC emission of interference | per EN 61131-2, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
RS-232/RS-485 Serial Interface
System Manual Series 750/753
Bid Text
753-652
753-652
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
750/753 Series I/O-System ‒ General Product Information
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Application Note CoDeSys 2.3
Beispiel zur Verwendung der Bibliothek Modb_I05.lib (a102607)
Library
Libraries for Building Automation CODESYS 2.3
CAD data
2D/3D Models 753-652
CAE data
ZUKEN Portal 753-652
WSCAD Universe 753-652
EPLAN Data Portal 753-652
Compliance Search
Environmental Product Compliance 753-652