788-355 - Relay module; Nominal input voltage: 24 VDC; 1 make contact; Limiting continuous current: 16 A; for lamp loads; Red status indicator; Module width: 15 mm; 2,50 mm²; gray
- Brand: Wago
- Product Code: 788-355
Description:
- Available Quantity: 0
$29.09
Technical data
Control circuit
Nominal input voltage UN | DC 24 V |
Input voltage range | -15 … +20 % |
Nominal input current at UN | 21.8 mA |
Load circuit
Number of make/switch-on contacts | 1 |
Contact material (relay) | AgSnO2 |
Limiting continuous current | 16 A |
Inrush current (resistive) max. | (AC) 120 A / 0.02 s; (AC) 25 A / 4 s |
Switching voltage (max.) | AC 250 V |
Switching power (resistive) max. | AC 4000 VA; DC (see load limit curve) |
Pull-in time (typ.) | 8 |
Drop-out time (typ.) | 2 |
Bounce time (typ.) | 2 |
Mechanical life | 30 x 106 switching operations |
Signaling
Status indicator | Red LED |
Safety and protection
Rated voltage | 250 |
Rated surge voltage | 4 |
Pollution degree | 3 |
Dielectric strength (control/load circuit) (AC, 1 min) | 4 kVrms |
Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
Safety information 1 | A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements. |
Protection type | IP20 |
Notes
Safety information 1 | A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements. |
Note |
|
Connection data
Connection technology | Push-in CAGE CLAMP® |
Solid conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inch |
Physical data
Width | 15 mm / 0.591 inch |
Height | 86 mm / 3.386 inch |
Depth from upper-edge of DIN-rail | 64 mm / 2.52 inch |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | gray |
Fire load | 0.936 |
Weight | 51.5 |
Environmental requirements
Ambient temperature (operation at UN) | -40 … 70 °C |
Ambient temperature UL (operation at UN) | -40 … 50 °C |
Surrounding air temperature (storage) | -40 … +70 °C |
Processing temperature | -25 … +50 °C |
Standards and specifications
Standards/specifications | EN 61010-2-201 EN 61810-1 EN 61373 UL 508 (max. 10 A) |
Instruction Leaflet
Sockets with Elementary Relay/ SSR
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 788-355
CAE data
EPLAN Data Portal 788-355
WSCAD Universe 788-355
ZUKEN Portal 788-355
Compliance Search
Environmental Product Compliance 788-355