852-103/040-000 - Industrial unmanaged switch; 8 - 10/100 Mb/s RJ45 ports; 2 100 Mb/s Fiber Optic ports; extended temperature range
- Brand: Wago
- Product Code: 852-103/040-000
Description: The 852-103/040-000 Switch is an industrial unmanaged ETHERNET switch with 8 Fast ETHERNET ports and 2 SFP slots (100BASE modules) for easily setting up small- to medium-sized networks. Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet and provides high vibration and shock resistance. Additionally, automatic transmission rate detection (auto-negotiation) and automatic identification of the transmit and receive lines (Auto MDI-X) allow simple plug-and-play operation, helping save time and money during commissioning. Status LEDs, a redundant power supply and an alarm contact (configurable via DIP switch) increase the switchs redundancy and diagnostic capabilities, providing higher operational uptime. Features: Redundant DC power supply Large supply voltage range: 9 … 48 V DIP switches to set alarm functions Full compliance with IEEE802.3, 802.3u stantards Non-blocking, store-and-forward switching Autonegotiation at all 10/100Base-TX ports Auto-MDI/MDIX (crossover) at all 10/100Base-TX ports
Description: The 852-103/040-000 Switch is an industrial unmanaged ETHERNET switch with 8 Fast ETHERNET ports and 2 SFP slots (100BASE modules) for easily setting up small- to medium-sized networks. Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet and provides high vibration and shock resistance. Additionally, automatic transmission rate detection (auto-negotiation) and automatic identification of the transmit and receive lines (Auto MDI-X) allow simple plug-and-play operation, helping save time and money during commissioning. Status LEDs, a redundant power supply and an alarm contact (configurable via DIP switch) increase the switchs redundancy and diagnostic capabilities, providing higher operational uptime. Features: Redundant DC power supply Large supply voltage range: 9 … 48 V DIP switches to set alarm functions Full compliance with IEEE802.3, 802.3u stantards Non-blocking, store-and-forward switching Autonegotiation at all 10/100Base-TX ports Auto-MDI/MDIX (crossover) at all 10/100Base-TX ports
- Available Quantity: 0
$572.30
Technical data
Switching mode | Store‐and‐forward; non-blocking |
Number of 100Base-TX ports | 8 |
Number of 100Base-FX ports | 2 |
Communication standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/FX IEEE 802.3x Flow Control |
Redundancy function | Redundant DC power supply |
Configuration options | DIP switch for signal contact |
Diagnostics | Signal contact |
MAC table (size) | 2000 addresses |
Jumbo frame size | 1536. |
Supply voltage | 9 … 48 VDC; Cable length:< 3 m |
Power consumption without PoE | 6.08 |
Power consumption (typ.) (24 V) | 5.76 |
ESD (contact/air discharge) | 8 KV / 15 KV |
Baud rate | Copper cable: 10/100 Mbit/s; Fiber optic:100 Mbit/s |
Transmission medium (communication/fieldbus) | Copper cable: Cat. 5 or higher, 100 m maximum cable length; Fiber optic: FX Multi-Mode, LX Single-Mode |
Optical fiber type | Single-Mode and Multi-Mode |
Packet throughput | 148,800 |
Controls | 12 x DIP switch: Alarm function power supplies and ports 1 … 10 |
Indicators | Device: LED (PWR, RPS) green: Power supply (primary), redundant power supply (secondary); LED (ALM) red: Alarm; LED (LNK/ACT, 100) green, LED (OFFLINE) red: Status fiber optic ports; per port: LED (100, LNK/ACT) green: Status 100 Mbps, LNK/ACT ports 1 … 8 |
Connection data
Connection technology: communication/fieldbus | Copper cable: 8 x RJ-45; Fiber optic: 2 x SFP-slots (e.g., with SFP module and LC fiber-optic connector) |
Connection technology: supply | 1 x Built-in male connector: 231-436/001-000; included female connector (MCS Connectors): 231-106/026-000 |
Physical data
Width | 50 mm / 1.969 inches |
Height | 162 mm / 6.378 inches |
Depth | 120 mm / 4.724 inches |
Mechanical data
Weight | 887 |
Color | black |
Housing material | Aluminum |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | -40 … +70 °C (UL max. +60 °C) |
Surrounding air temperature (storage) | -40 … +85 °C |
Protection type | IP30 |
Relative humidity (without condensation) | 95 |
Mounting type | DIN-35 rail |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-4 |
Manual
8-Port 100 BASE-TX + 2-Slot 100 BASE-FX Industrial Switch
Bid Text
852-103/040-000
852-103/040-000
Instruction Leaflet
Gebrauchs- und Montageanleitung 852-101 /852-102 / 852-103 / 852-104
System Description
Industrial Switches ‒ General Product Information
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAE data
EPLAN Data Portal 852-103/040-000
WSCAD Universe 852-103/040-000
EPLAN Data Portal 852-103/040-000
WSCAD Universe 852-103/040-000
Compliance Search
Environmental Product Compliance 852-103/040-000