852-1505 - Industrial managed switch - Power over Ethernet; 8 - 10/100/1000 Mb/s RJ45 ports; 4 - 1000 Mb/s Fiber Optic ports; Extended temperature range
- Brand: Wago
- Product Code: 852-1505
- Available Quantity: 0
$1,963.00
Technical data
Switching mode | Store‐and‐forward; non-blocking |
Number of 1000BASE-T ports | 8 |
Number of 1000Base SX/LX ports | 4 |
Communication standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-SX/LX IEEE 802.3ad Port Trunk with LACP IEEE 802.3x Flow Control IEEE 802.1d Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.1q VLAN Tagging IEEE 802.1p Prioritization IEEE 802.1x Port Authentication IEEE 802.1ab Link Layer Discovery Protocol (LLDP) IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at High Power over Ethernet (PoE+) ITU-T G8032v1/v2 Ethernet Ring Protection Switching (ERPS) ITU-T G8032v1/v2 Ethernet Ring Protection Switching (ERPS) |
Redundancy function | Redundant DC power supply; STP; RSTP; MSTP; Jet Ring < 300 ms; Xpress Ring < 20 ms; Dual Homing < 20 ms; Dual Ring; ERPSv2 < 50 ms; LCAP |
Configuration options | DIP switch for signal contact Command Line Interface SNMPv1/v2c/v3 DIP switch for signal contact Command Line Interface SNMPv1/v2c/v3 |
Diagnostics | Signal contact, Modbus/TCP, port status, port statistics, port load, traffic monitor, SFP information, syslog, mail alarm, SNMP traps |
MAC table (size) | 16000 addresses |
Jumbo frame size | 10000. |
Supply voltage | 48 … 57 VDC |
Power consumption without PoE | 18 |
Full load power consumption | 258 W with 8 PoE+ |
ESD (contact/air discharge) | 8 KV / 15 KV |
Baud rate | Copper cable: 10/1000 Mbit/s; Fiber optic:1000 Mbit/s |
Transmission medium (communication/fieldbus) | Copper cable: Cat. 5e or higher, 100 m maximum cable length; Fiber optic: SX Multi-Mode, LX Single-Mode |
Optical fiber type | Single-Mode and Multi-Mode |
VLAN | Port-based and tag-based (4k VIDs) |
Controls | 14 x DIP switch: Alarm function power supplies and ports 1 … 12 |
Indicators | Device: LED (PWR, RPS, POST) green: power supply (primary), redundant power supply (secondary), POST function; LED (ALM) red: Alarm; LED (SFP) green, Status fiber optic ports; per port: LED (1000M, 10/100M) green, yellow: Status 1000 Mbps, 10/100 Mbps ports 1 … 8 |
Connection data
Connection technology: communication/fieldbus | Copper cable: 8 x RJ-45; Fiber optic: 4 x SFP-slots (e.g., with SFP module and LC fiber-optic connector) Copper cable: 8 x RJ-45; Fiber optic: 4 x SFP; LC fiber-optic connector |
Connection technology: supply | 1 x Built-in male connector: 231-436/001-000; included female connector (MCS Connectors): 2231-106/026-000 1 x Built-in male connector: 231-436/001-000; included female connector (MCS Connectors): 2231-106/026-000 |
Physical data
Width | 50 mm / 1.969 inches 50 mm / 1.969 inch |
Height | 162 mm / 6.378 inches 162 mm / 6.378 inch |
Depth | 120 mm / 4.724 inches 120 mm / 4.724 inch |
Mechanical data
Weight | 860 |
Color | black metallic metallic black |
Housing material | Aluminum |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | -40 … +70 °C -40 … 70 °C |
Surrounding air temperature (storage) | -40 … +80 °C -40 … 80 °C |
Protection type | IP30 |
Relative humidity (without condensation) | 95 |
Mounting type | DIN-35 rail |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-4 |
Fire load | 0.234 |