891-8385/266-101 - pre-assembled connecting cable; Cca; Plug/open-ended; 5-pole; Cod. I; H05Z1Z1-F 5G 1.5 mm²; 1 m; 1,50 mm²
- Brand: Wago
- Product Code: 891-8385/266-101
Description: Cable assembly WINSTA® MINI I coding Use effective pluggable connections instead of laborious screw connections: With the WINSTA® MINI cable assembly rated current 16 A. Our pluggable installation connectors with spring pressure connection technology function without screw connections. They allow fast, efficient, error-free installation in a large number of possible uses. The coding options reduce installation errors, allowing fast, secure wiring of all components. I coding in blue is used to identify WINSTA® MINI pluggable installation connectors, which are used predominantly in building automation for activating lighting. Thanks to its particularly small dimensions, our WINSTA® MINI Pluggable Connection System with Push-in CAGE CLAMP® spring pressure connection technology is very suitable in very tight spaces, i.e., for connections when very little room is available. If you need to satisfy stricter safety standards, you should use cables with fire class C. These are suitable for use in buildings with special high demands on safety. Eliminating halogens as an additive in the production of this cable assembly substantially improves fire safety and minimises environmental pollution. Fast, error-free assembly thanks to cable assemblies from WAGO The cable is pre-assembled with a plug and a free end. WINSTA® is the pluggable connection system that is ideally tailored to the strict requirements of electrical installation. It allows error-free installation of cables and components, quickly and reliably. Choose quality and durability – the WINSTA® MINI pluggable installation connector with fire class C from WAGO makes the electrical installation of electrical components substantially easier. pluggable installation connectors with protection against mismating compact design for conductors with a cross-section up to 1.5 mm² for lighting management exact dimensions quick replacement of defective units during ongoing operation
Description: Cable assembly WINSTA® MINI I coding Use effective pluggable connections instead of laborious screw connections: With the WINSTA® MINI cable assembly rated current 16 A. Our pluggable installation connectors with spring pressure connection technology function without screw connections. They allow fast, efficient, error-free installation in a large number of possible uses. The coding options reduce installation errors, allowing fast, secure wiring of all components. I coding in blue is used to identify WINSTA® MINI pluggable installation connectors, which are used predominantly in building automation for activating lighting. Thanks to its particularly small dimensions, our WINSTA® MINI Pluggable Connection System with Push-in CAGE CLAMP® spring pressure connection technology is very suitable in very tight spaces, i.e., for connections when very little room is available. If you need to satisfy stricter safety standards, you should use cables with fire class C. These are suitable for use in buildings with special high demands on safety. Eliminating halogens as an additive in the production of this cable assembly substantially improves fire safety and minimises environmental pollution. Fast, error-free assembly thanks to cable assemblies from WAGO The cable is pre-assembled with a plug and a free end. WINSTA® is the pluggable connection system that is ideally tailored to the strict requirements of electrical installation. It allows error-free installation of cables and components, quickly and reliably. Choose quality and durability – the WINSTA® MINI pluggable installation connector with fire class C from WAGO makes the electrical installation of electrical components substantially easier. pluggable installation connectors with protection against mismating compact design for conductors with a cross-section up to 1.5 mm² for lighting management exact dimensions quick replacement of defective units during ongoing operation
Notes
Note | Cables with a different fire class can be found in the eShop. |
Electrical data
Note on contact resistance | approx. 1 mΩ of contact resistance
|
Connection data
Total number of potentials | 5 |
PE function | Preceding PE contact |
Conductor preparation | ultrasonically tip-bonded |
Physical data
Pin spacing | 4.4 mm / 0.173 inches |
Total length | 1 |
Mechanical data
Application | DALI, Lichtmanagement |
Coding | I |
Variable coding | No |
Marking | N ⏚ L - + |
Potential Marking | N ⏚ L - + |
Mating force of a plug-in connection | approx. 20 … 70 N (depending on pole number) |
Retention force of a plug-in connection | when locked: > 80N |
Unmating force of a plug-in connection | when unlocked: approx. 20 … 70 N (depending on pole number) |
Number of mating cycles | 200, without resistive load |
Connection type | Plug - Free end |
Type of pre-assembled cable | Connecting cable |
Cable type | H05Z1Z1-F 5G1.5 |
Protection type | IP20; IP40 when mated |
Plug-in connection
Mismating protection | Yes |
Note on mismating protection | All WINSTA® components are 100% protected against mismating when: |
Locking lever | Can be retrofitted |
Locking of plug-in connection | locking lever |
Material data
Note (material data) | |
Color | blue |
Insulation material | Polyamide (PA66) |
Fire class per EN 50575 | Cca |
Contact material | Copper or copper alloy; surface-treated |
Fire load | 0.307 |
Connector color | blue |
Printing color of mating face | white |
Strain relief color | black |
Sheathed cable color | black |
Printing color of sheathed cable | white |
Halogen-free | Yes |
Sheath material | Halogen-free |
Weight | 184.8 |
Copper weight of the pipe | 0.072 |
Environmental requirements
Processing temperature | -5 … +40 °C |
Continuous operating temperature | -35 … +85 °C |
Note on continuous operating temperature | Cable for temperatures ≤ 70 °C (including halogen-free) |
Compliance Search
Environmental Product Compliance 891-8385/266-101
