897-1651 - Flat cable; Eca; 5G 16 mm²; PVC; 3L + N + PE; 0.6/1 kV; 16,00 mm²; light gray
- Brand: Wago
- Product Code: 897-1651
Description: Flat cable WINSTA® IDC 5-pole When using the flat cable from the WINSTA® IDC product line, error-free electrical installation is guaranteed. A comprehensive range of accessories complements the WINSTA® product line from WAGO. Of course, the safety of buildings must always be ensured, even after the electrical installation has been performed. The mandatory safety requirements in connection with EU CPR are fully satisfied by this product through fire class E. Lower costs through fast commissioning and elimination of service expenses – solutions from WINSTA® IDC The WINSTA® Pluggable Connection System is ideally tailored to the very strict requirements of building installation. It makes electrical installation pluggable, and therefore faster, even more reliable, and error-free. Using this pre-assembled system decreases time spent on assembly and installation errors at the construction site. Choose durability and quality – the WINSTA® IDC accessory with fire class E from WAGO makes the electrical installation of electrical components significantly easier. products perfectly tailored to your requirements guarantee safe use quick replacement of defective units during ongoing operation
Description: Flat cable WINSTA® IDC 5-pole When using the flat cable from the WINSTA® IDC product line, error-free electrical installation is guaranteed. A comprehensive range of accessories complements the WINSTA® product line from WAGO. Of course, the safety of buildings must always be ensured, even after the electrical installation has been performed. The mandatory safety requirements in connection with EU CPR are fully satisfied by this product through fire class E. Lower costs through fast commissioning and elimination of service expenses – solutions from WINSTA® IDC The WINSTA® Pluggable Connection System is ideally tailored to the very strict requirements of building installation. It makes electrical installation pluggable, and therefore faster, even more reliable, and error-free. Using this pre-assembled system decreases time spent on assembly and installation errors at the construction site. Choose durability and quality – the WINSTA® IDC accessory with fire class E from WAGO makes the electrical installation of electrical components significantly easier. products perfectly tailored to your requirements guarantee safe use quick replacement of defective units during ongoing operation
Electrical data
IEC Approvals
Legend (ratings) | (III / 3) ≙ Overvoltage category III / Pollution degree 3 |
Rated voltage | 0.6 / 1 kV |
Electrical data
IEC Approvals
Legend (ratings) | (III / 3) ≙ Overvoltage category III / Pollution degree 3 |
Rated voltage | 0.6 / 1 kV |
Connection data
Connection 1
Number of poles | 5 |
Wire cross-section | 16 |
Physical data
Width | 48.5 mm / 1.91 inch |
Height | 11.3 mm / 0.45 inch |
Mechanical data
Variable coding | No |
Plug-in connection
Mismating protection | No |
Material data
Note (material data) | |
Color | light gray |
Fire class per EN 50575 | Eca |
Fire load | 10.62 |
Sheath material | PVC |
Weight | 1300 |
Copper weight of the pipe | 0.768 |
Environmental requirements
Processing temperature | 5 … 40 °C |
Continuous operating temperature | -25 … +70 °C |
Note on continuous operating temperature | Insulating parts for temperatures ≤ 105 °C |
Bid Text
897-1651
897-1651
CAE data
WSCAD Universe 897-1651
Compliance Search
Environmental Product Compliance 897-1651