Productfeatures
- 2 cable entries M 20 x 1.5
- Metal enclosure
- 118 mm x 155 mm x 64 mm ( basic component)
- Actuator head can be repositioned in steps 4 x 90°
- Continuous adjustment of lever position 360°
- Lever can be transposed by 180°
- In temperature-resistant version, the roller can be mounted in two different positions on the shaft
Data
Ordering data
Product type description | TL 461-22Y |
Article number (order number) | 101059433 |
EAN (European Article Number) | 4030661254326 |
eCl@ss number, version 9.0 | 27-27-06-01 |
eCl@ss number, version 11.0 | 27-27-06-01 |
eCl@ss number, version 12.0 | 27-27-06-01 |
ETIM number, version 7.0 | EC000030 |
ETIM number, version 6.0 | EC000030 |
Approvals - Standards
Certificates | DNV.GL EAC |
General data
Standards | EN 60947-5-1 |
Working principle | mechanical |
Slide form | Castor |
Enclosure material | Grey cast iron, galvanised |
Enclosure coating material | painted |
Material of the contacts, electrical | Silver |
Roller material | Plastic |
Gross weight | 2,405 g |
General data - Features
Number of openers | 2 |
Number of shutters | 2 |
Safety classification - Safety outputs
B | 2,000,000 Operations |
Mechanical data
Actuating element | Roller lever |
Mechanical life, minimum | 10,000,000 Operations |
Actuating angle, from left of switch axis | 30 ° |
Actuating angle, from right of switch axis | 30 ° |
Contact opening | max. 2 x 6 mm |
Actuating speed, minimum | 1 mm/min |
Actuating speed, maximum | 3 m/s |
Note (Actuating speed) | Actuating speed with vertical actuating angle to switch axis |
Mechanical data - Connection technique
Type of connection | Screw terminals M20 x 1.5 |
Cable section, minimum | 1.5 mm² |
Cable section, maximum | 2.5 mm² |
Note (Cable section) | All indications including the conductor ferrules. |
Wire cross-section | 13 AWG |
Mechanical data - Dimensions
Length of sensor | 64 mm |
Width of sensor | 118 mm |
Height of sensor | 248 mm |
Width of Castor | 9 mm |
Diameter of Castor | 36 mm |
Ambient conditions
Degree of protection | IP65 |
Ambient temperature, minimum | -30 °C |
Ambient temperature, maximum | +90 °C |
Ambient conditions - Insulation values
Rated insulation voltage U | 400 V |
Rated impulse withstand voltage U | 6 kV |
Electrical data
Thermal test current | 16 A |
Utilisation category AC-15 | 400 VAC |
Utilisation category AC-15 | 4 A |
Switching element | NO contact / NC contact |
Note (Switching element) | with double break |
Switching principle | Creep circuit element |
Operating instructions and Declaration of conformity
Position and limit switches
EC Declaration of conformity
T/M 422 T/M 441 T/M 452 T/M 461 T/M 470 M 442 T 420
DNV-GL Certificate
422 , 441 , 452 , 461 , 470