101126029 - IFL 50-385-10/01D
- Brand: Schmersal
- Product Code: 101126029
Description: Product type description:IFL (1)-(2)-(3)(4)(5)(6)(7)(1)50Switching distance 50 mm
(2)385Square design, 135 x 80 x 40 mm(3)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(4)withoutCableDDC 2-wire(5)ZProtection class IP67(6)Nn-typePp-type(7)2130Can be used up to +130C, without LED switching conditions display
Description: Product type description:IFL (1)-(2)-(3)(4)(5)(6)(7)(1)50Switching distance 50 mm
(2)385Square design, 135 x 80 x 40 mm(3)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(4)withoutCableDDC 2-wire(5)ZProtection class IP67(6)Nn-typePp-type(7)2130Can be used up to +130C, without LED switching conditions display
Productfeatures
- 3 Cable entry M 20 x 1.5
- Thermoplastic enclosure
- DC 2-wire
- Double-insulated
- Wiring compartment
- Design 385
Data
Ordering data
Product type description | IFL 50-385-10/01D |
Article number (order number) | 101126029 |
EAN (European Article Number) | 4030661277691 |
eCl@ss number, version 9.0 | 27-27-01-01 |
eCl@ss number, version 11.0 | 27-27-01-01 |
ETIM number, version 7.0 | EC002714 |
ETIM number, version 6.0 | EC002714 |
Approvals - Standards
Certificates | CCC |
General data
Standards | DIN VDE 0660-208 IEC/EN 60947-5-2 |
Housing construction form | Block |
Installation conditions (mechanical) | not flush |
Enclosure material | Plastic |
Gross weight | 378 g |
General data - Features
Integral system diagnostics, status | Yes |
Number of cable wires | 2 |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance | 50 mm |
Mechanical data - Connection technique
Type of connection | Screw terminals M20 x 1.5 |
Cable section, maximum | 2 x 1.5 mm² |
Mechanical data - Dimensions
Length of sensor | 135 mm |
Width of sensor | 80 mm |
Height of sensor | 40 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Protection class | II |
Electrical data
Voltage type | DC (direct current) |
Operating voltage, minimum | 10 V |
Operating voltage, maximum | 40 V |
Operating current, minimum | 0.01 mA |
Operating current | 200 mA |
Switching element | NO contact or NC contact |
Protection circuit integrated | inductive interference protection Protection against polarity reversal Surge protection Max. fuse rating |
Switching frequency, approx. | 50 Hz |
Electrical data - Digital Output
Voltage drop U | 5.5 V |
Current at Voltage drop U | 0.1 A |
Design of switching elements | Two-wire |
Leakage current, maximum I | 0.5 mA |
Status indication
Note (Integral System Diagnostics, status ) | yellow LED |
Note
Note (General) | Programmable by repositioning the plug-in jumper at the terminal screws Mounting angle HW 385-1 to simplify mounting available |
Operating instructions (supplementary sheet/quick guide)
IFL Inductive proximity switch
EC Declaration of conformity
IFL Inductive proximity switch