Productfeatures
- Cable output left and 2 shielding plates
- Actuation from front
- Non-contact principle
- 1 Reed contakts
- Long life
- Actuating surface and direction of actuation marked by switch symbol
- 85 mm x 26 mm x 24 mm
- Thermoplastic enclosure
- Spade connector
Data
Ordering data
Product type description | BN 325-R-1279 3,0M |
Article number (order number) | 101147095 |
EAN (European Article Number) | 4030661141336 |
eCl@ss number, version 9.0 | 27-27-01-05 |
eCl@ss number, version 11.0 | 27-27-01-05 |
ETIM number, version 7.0 | EC002544 |
ETIM number, version 6.0 | EC002544 |
General data
Working principle | Magnetic drive |
Housing construction form | rectangular |
Enclosure material | Glass-fibre, reinforced thermoplastic |
Active area | Plastic |
Gross weight | 185 g |
General data - Features
Latching | Yes |
Suitable for elevators | Yes |
Number of snap-in contacts | 1 |
Mechanical data
Actuating element | Magnet |
Mechanical life, minimum | 1,000,000,000 Operations |
Repeat accuracy R R | 0.3 mm |
Actuating speed, maximum | 18 m/s |
Mounting | rear with 2 threaded bolts |
Mechanical data - Switching distances according EN IEC 60947-5-3
Note (Switching distance Sn) | Actuating distance up to 55 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed. |
Mechanical data - Connection technique
Length of cable | 3 m |
Wire cross-section | 0.75 mm |
Wire cross-section | 18 AWG |
Material of the Cable mantle | H03VV-F |
Mechanical data - Dimensions
Length of sensor | 24 mm |
Width of sensor | 85 mm |
Height of sensor | 26 mm |
Ambient conditions
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Resistance to vibration to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
Restistance to shock | 50 g / 11 ms |
Electrical data
Switching current, maximum | 3 A |
Switching capacity, maximum | 120 W |
Switching capacity, maximum | 120 VA |
Electrical data - Digital Output
Design of switching elements | Reed contacts |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Accessory
Recommendation (actuator) | BP 10 S 2x BP 10 S BP 15 S BP 34 S BP 20 S BP 31 S BP 11 S 2x BP 11 S BP 12 S BP 21 S 2x BP 21 S BP 10 N 2x BP 10 N BP 15 N 2 x BP 15/2 N 2x BP 15/2 S BP 34 N BP 20 N BP 31 N |
Note
Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. |
Mounting and wiring instructions
BN 325
Operating instructions and Declaration of conformity
BN 325-R (G)
EC Declaration of conformity
Magnetic reed switch
Info
Magnetic reed switch - Actuating distances
Magnetic reed switch