101056952 - MS 064-40Y
- Brand: Schmersal
- Product Code: 101056952
Description: Product type description:T(1) 064-(2)Y-(3)(1)SPlunger SJOffset roller lever JXOffset roller lever X(2)033 NC contact121 NO contact/2 NC contacts212 NO contacts/1 NC contact303 NO contacts044 NC contact131 NO contacts/3 NC contact222 NO contacts/2 NC contact313 NO contacts/1 NC contact404 NO contacts(3)UESlow action with overlapping contactsHSlow action with staggered contactsRLatching 2 x 45°
Description: Product type description:T(1) 064-(2)Y-(3)(1)SPlunger SJOffset roller lever JXOffset roller lever X(2)033 NC contact121 NO contact/2 NC contacts212 NO contacts/1 NC contact303 NO contacts044 NC contact131 NO contacts/3 NC contact222 NO contacts/2 NC contact313 NO contacts/1 NC contact404 NO contacts(3)UESlow action with overlapping contactsHSlow action with staggered contactsRLatching 2 x 45°
Productfeatures
- Metal enclosure
- 184 mm x 111 mm x 149 mm (basic component)
- 2 cable entries M 25 x 1.5
- 3 or 4 Contacts
- Actuator heads can be repositioned by 4 x 90°
Data
Ordering data
Product type description | MS 064-40Y |
Article number (order number) | 101056952 |
EAN (European Article Number) | 4030661022673 |
eCl@ss number, version 9.0 | 27-27-06-01 |
eCl@ss number, version 11.0 | 27-27-06-01 |
eCl@ss number, version 12.0 | 27-27-06-01 |
ETIM number, version 7.0 | EC000030 |
ETIM number, version 6.0 | EC000030 |
Approvals - Standards
Certificates | cULus CCC EAC |
General data
Standards | EN 60947-5-1 |
Working principle | mechanical |
Slide form | Sphere |
Enclosure material | Grey cast iron, galvanised |
Enclosure coating material | painted |
Material of the contacts, electrical | Silver |
Gross weight | 3,570 g |
General data - Features
Number of shutters | 4 |
Safety classification - Safety outputs
B | 2,000,000 Operations |
Mechanical data
Actuating element | Plunger |
Mechanical life, minimum | 30,000 Operations |
Actuating angle | 20 ° |
Contact opening | 2 x 4 mm |
Actuating speed, minimum | 600 mm/min |
Actuating speed, maximum | 1 m/s |
Note (Actuating speed) | Actuating speed with vertical actuating angle to switch axis |
Mechanical data - Connection technique
Type of connection | Screw terminals M20 x 1.5 |
Cable section, minimum | 1.5 mm² |
Cable section, maximum | 4 mm² |
Note (Cable section) | All indications including the conductor ferrules. |
Wire cross-section | 11 AWG |
Mechanical data - Dimensions
Length of sensor | 149 mm |
Width of sensor | 156 mm |
Height of sensor | 111 mm |
Diameter of the Plunger | 10 mm |
Ambient conditions
Degree of protection | IP65 |
Ambient temperature, minimum | -30 °C |
Ambient temperature, maximum | +90 °C |
Ambient conditions - Insulation values
Rated insulation voltage U | 500 V |
Rated impulse withstand voltage U | 6 kV |
Electrical data
Thermal test current | 25 A |
Utilisation category AC-15 | 400 VAC |
Utilisation category AC-15 | 25 A |
Switching element | Normally open contact (NO) |
Note (Switching element) | with double break galvanically separated contact bridges |
Switching principle | Snap switch element |
Switching frequency | 1,000 /h |
Note
Note (General) | Actuation from the side of the plunger should be avoided, since this reduces the mechanical life of the position switch. |
Operating instructions and Declaration of conformity
Position and limit switches
EC Declaration of conformity
T/M 064 T/M 067 T/M 471 T/M 130 T 136 T 246 T 240
UL Certificate
(414.9 kB, 08/01/2019)