Productfeatures
- 2 cable entries M 20 x 1.5
- Metal enclosure
- 118 mm x 155 mm x 64 mm ( basic component)
- Actuator heads can be repositioned by 4 x 90°
Data
Ordering data
Product type description | MK 461-22Y |
Article number (order number) | 101059049 |
EAN (European Article Number) | 4030661034591 |
eCl@ss number, version 9.0 | 27-27-06-01 |
eCl@ss number, version 11.0 | 27-27-06-01 |
eCl@ss number, version 12.0 | 27-27-06-01 |
ETIM number, version 7.0 | EC000030 |
ETIM number, version 6.0 | EC000030 |
Approvals - Standards
Certificates | DNV.GL EAC |
General data
Standards | EN 60947-5-1 |
Working principle | mechanical |
Slide form | Castor |
Enclosure material | Grey cast iron, galvanised |
Enclosure coating material | painted |
Material of the contacts, electrical | Silver |
Roller material | Plastic |
Gross weight | 2,025 g |
General data - Features
Number of openers | 2 |
Number of shutters | 2 |
Safety classification - Safety outputs
B | 2,000,000 Operations |
Mechanical data
Actuating element | Offset roller lever |
Mechanical life, minimum | 5,000,000 Operations |
Actuating angle, from left of switch axis | 45 ° |
Actuating angle, from right of switch axis | 30 ° |
Contact opening | max. 2 x 2.5 mm |
Actuating speed, minimum | 1 mm/min |
Actuating speed, maximum | 0.5 m/s |
Note (Actuating speed) | Actuating speed with vertical actuating angle to switch axis |
Mechanical data - Connection technique
Type of connection | Screw terminals M20 x 1.5 |
Cable section, minimum | 1.5 mm² |
Cable section, maximum | 2.5 mm² |
Note (Cable section) | All indications including the conductor ferrules. |
Wire cross-section | 13 AWG |
Mechanical data - Dimensions
Length of sensor | 64 mm |
Width of sensor | 118 mm |
Height of sensor | 229 mm |
Width of Castor | 6.5 mm |
Diameter of Castor | 25 mm |
Ambient conditions
Degree of protection | IP65 |
Ambient temperature, minimum | -30 °C |
Ambient temperature, maximum | +90 °C |
Ambient conditions - Insulation values
Rated insulation voltage U | 250 V |
Rated impulse withstand voltage U | 4 kV |
Electrical data
Thermal test current | 16 A |
Utilisation category AC-15 | 230 VAC |
Utilisation category AC-15 | 4 A |
Switching element | NO contact / NC contact |
Switching principle | Snap switch element |
Bounce duration, maximum | 5 ms |
Switchover time, maximum | 35 ms |
Note
Note (General) | Actuation from the right should be avoided, since this reduces the mechanical life of the position switch. |
Operating instructions and Declaration of conformity
Position and limit switches
EC Declaration of conformity
T/M 422 T/M 441 T/M 452 T/M 461 T/M 470 M 442 T 420
DNV-GL Certificate
422 , 441 , 452 , 461 , 470