103002177 - EX-BNS 40S-12ZG-C
- Brand: Schmersal
- Product Code: 103002177
Description: Product type description:EX-BNS40S-12Z(1)-(2)-3GD(1)withoutwithout LED switching conditions displayGwith LED switching conditions display(2)withoutWith countersunk mounting holesCconcealed threaded holes on the back
Description: Product type description:EX-BNS40S-12Z(1)-(2)-3GD(1)withoutwithout LED switching conditions displayGwith LED switching conditions display(2)withoutWith countersunk mounting holesCconcealed threaded holes on the back
Productfeatures
- LED version
- especially easy to clean through concealed threaded holes at the rear
- Explosion protection for ATEX Zones 2 and 22
- Stainless steel enclosure
- 88 mm x 27 mm x 14,5 mm
- Concealed mounting possible
- Insensitive to transverse misalignment
- no mechanical wear
- Suitable for food processing industry
- Cable connection suitable for the food industry
Data
Ordering data
Product type description | EX-BNS 40S-12ZG-C |
Article number (order number) | 103002177 |
EAN (European Article Number) | 4030661428512 |
eCl@ss number, version 9.0 | 27-27-24-02 |
eCl@ss number, version 11.0 | 27-27-24-02 |
ETIM number, version 7.0 | EC002544 |
ETIM number, version 6.0 | EC002544 |
Explosion protection
Explosion protection: regulations | EN 60079-0 EN 60079-15 EN 60079-31 |
Explosion protection zones | 22 2 |
Explosion protection category | 3D 3G |
Explosion protection designation | II 3G Ex nA nC IIC T6 Gc II 3D Ex tc IIIC T80°C Dc X |
General data
Standards | BG-GS-ET-14 IEC 60947-5-3 |
Housing construction form | Block |
Installation conditions (mechanical) | not flush |
Enclosure material | Stainless steel (V4A) |
Gross weight | 200 g |
General data - Features
Coding | Yes |
Short circuit detection | Yes |
Cross-circuit detection | Yes |
Concealed, threaded holes on the back | Yes |
Integral system diagnostics, status | Yes |
Prerequisite evaluation unit | Yes |
Number of openers | 2 |
Number of shutters | 1 |
Safety classification - Safety outputs
B | 25,000,000 Operations |
Mechanical data
Active area | lateral |
Actuating element | Magnet |
Impact energy, maximum | 7 J |
Direction of motion | Head-on to the active surface |
Mechanical data - Switching distances according EN IEC 60947-5-3
Assured switching distance "ON" S | 8 mm |
Assured switching distance "OFF" S | 18 mm |
Mechanical data - Connection technique
Type of connection | Cable |
Length of cable | 1 m |
Wire cross-section | 0.25 mm |
Wire cross-section | 23 AWG |
Material of the Cable mantle | LiYY |
Mechanical data - Dimensions
Length of sensor | 14.5 mm |
Width of sensor | 88 mm |
Height of sensor | 27 mm |
Ambient conditions
Degree of protection | IP65 IP67 |
Ambient temperature, minimum | -20 °C |
Ambient temperature, maximum | +60 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +80 °C |
Resistance to vibration to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
Restistance to shock | 30 g / 11 ms |
Electrical data
Voltage type | DC (direct current) |
Required rated short-circuit current to EN 60947-5-1 | 100 A |
Switching voltage, maximum | 24 VDC |
Switching current, maximum | 0.01 A |
Switching capacity, maximum | 0.2 W |
Switching frequency, maximum | 5 Hz |
Electrical data - Digital Output
Design of switching elements | Miscellaneous, Reed contacts |
Status indication
Note (Integral System Diagnostics, status ) | The LED is illuminated when the guard is closed. |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Accessory
Recommendation (actuator) | BPS 40S-2 BPS 40S-1-C BPS 40S-2-C |
Recommended safety switchgear | SRB-E-301ST SRB-E-201LC |
Note
Note (General) | Contact symbols shown for the closed condition of the guard device. The contact configuration for versions with or without LED is identical. |
Operating instructions and Declaration of conformity
EX-BNS40S
EX-BNS40S-3GD