141220.00 - Leeson 10 HP Crop Dryer Motor, 1 phase, 3600 RPM, 230 V, 215TZ Frame, TEAO - 141220.00
- Brand: Regal
- Product Code: 141220.00
Description:
Rolled steel construction
Oversized sealed bearings
Normally closed thermostat protected
50 degree C ambient temperature
Grease fitting with relief
Epoxy paint
Double sealed ball bearings
1 longer shaft than NEMA
Description:
Rolled steel construction
Oversized sealed bearings
Normally closed thermostat protected
50 degree C ambient temperature
Grease fitting with relief
Epoxy paint
Double sealed ball bearings
1 longer shaft than NEMA
Specifications
General Specifications
UPC: | 691720103777 |
Weight: | 136.00 LB |
Packaged Length: | 22.19 IN |
Packaged Width: | 16.5 IN |
Packaged Height: | 14 IN |
Nameplate Specifications
Output HP: | 10 Hp |
Output KW: | 7.5 kW |
Frequency: | 60 Hz |
Voltage: | 230 V |
Current: | 45.8 A |
Speed: | 3475 rpm |
Service Factor: | 1.5 |
Phase: | 1 |
Efficiency: | 82.5 % |
Power Factor: | 87.8 |
Duty: | Continuous |
Insulation Class: | F |
Design Code: | NO DESIGN CODE |
KVA Code: | D |
Frame: | 215TZ |
Enclosure: | Totally Enclosed Air Over |
Thermal Protection: | Thermostats (N/C) |
Ambient Temperature: | 40 °C |
Drive End Bearing Size: | 6307 |
Opp Drive End Bearing Size: | 6206 |
UL: | Recognized |
CSA: | Y |
CE: | N |
IP Code: | 43 |
Number of Speeds: | 1 |
Technical Specifications
Electrical Type: | Capacitor Start Induction Run |
Starting Method: | Across The Line |
Poles: | 2 |
Rotation: | Selective Counterclockwise |
Resistance Main: | .151 Ohms |
Mounting: | Rigid Base |
Motor Orientation: | Horizontal |
Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball |
Frame Material: | Rolled Steel |
Shaft Type: | Single Special Extension |
Overall Length: | 18.17 in |
Frame Length: | 11.15 in |
Shaft Diameter: | 1.125 in |
Shaft Extension: | 3.75 in |
Assembly/Box Mounting: | F3 |
OUTLINE
CONNECTION
CERTIFICATION
CAD Template
PERFORMANCE
3D CAD
OPERATION MANUAL