048A17T119 - Marathon 0.50 HP General Purpose Farm Duty Motor, 1 phase, 1800 RPM, 115/230 V, 48Y Frame, TEAO - X032
- Brand: Regal
- Product Code: 048A17T119
Description:
Double-shielded bearings extend the service life of the motor.
EXXON® Polyrex® EM Grease supports extreme temperatures between -20°F(-29 ˚ C) and +350°F(+177˚C).
Shaft flingers protect bearings from damage caused by dirt and rain.
Condensation drains allow the motor to expel and drain built-up moisture.
Description:
Double-shielded bearings extend the service life of the motor.
EXXON® Polyrex® EM Grease supports extreme temperatures between -20°F(-29 ˚ C) and +350°F(+177˚C).
Shaft flingers protect bearings from damage caused by dirt and rain.
Condensation drains allow the motor to expel and drain built-up moisture.
Specifications
General Specifications
UPC: | 722856028075 |
Weight: | 24.00 LB |
Packaged Length: | 13.75 IN |
Packaged Width: | 7.88 IN |
Packaged Height: | 8.75 IN |
Nameplate Specifications
Output HP: | 0.50 Hp |
Output KW: | 0.37 kW |
Frequency: | 60 Hz |
Voltage: | 115/230 V |
Current: | 5.4/2.7 A |
Speed: | 1625 rpm |
Service Factor: | 1 |
Phase: | 1 |
Efficiency: | 72 % |
Power Factor: | 93.5 |
Duty: | Continuous |
Insulation Class: | B |
Design Code: | No Design Code |
KVA Code: | B |
Frame: | 48Y |
Enclosure: | Totally Enclosed Air Over |
Thermal Protection: | Automatic Lock Rotor Only |
Ambient Temperature: | 40 °C |
Drive End Bearing Size: | 6203 |
Opp Drive End Bearing Size: | 6203 |
UL: | Recognized |
CSA: | Y |
CE: | N |
IP Code: | 43 |
Number of Speeds: | 1 |
Technical Specifications
Electrical Type: | Permanent Split Capacitor |
Starting Method: | Across The Line |
Poles: | 4 |
Rotation: | Selective Counterclockwise |
Resistance Main: | 0 Ohms |
Mounting: | Resilient Base - Extended Studs |
Motor Orientation: | Horizontal |
Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball |
Frame Material: | Rolled Steel |
Shaft Type: | Single Special Extension |
Overall Length: | 11.81 in |
Frame Length: | 7.25 in |
Shaft Diameter: | 0.500 in |
Shaft Extension: | 2.56 in |
Assembly/Box Mounting: | F1 Only |
OUTLINE
CONNECTION
CERTIFICATION
CAD Template
PERFORMANCE
3D CAD
OPERATION MANUAL