857-569 - JUMPFLEX® signal conditioner; power; configurable; with digital output
- Brand: Wago
- Product Code: 857-569
Description: Short description: WAGOs power measurement module measures both AC/DC voltages and currents, converting the input signal into a standard analog signal at the output. Measured value processing can be switched between RMS value or arithmetic mean value and between effective, apparent or reactive power, and phase angle. Features: Two isolated measurement inputs for both AC/DC voltages and currents RMS measurement or arithmetic mean value A digital signal output reacts to configured measurement range limits (on/off switching delay and threshold value switch function can be configured with up to two threshold values). Switchable filter function Safe 3-way isolation with 2.5 kV test voltage per DIN EN 61010-1
Description: Short description: WAGOs power measurement module measures both AC/DC voltages and currents, converting the input signal into a standard analog signal at the output. Measured value processing can be switched between RMS value or arithmetic mean value and between effective, apparent or reactive power, and phase angle. Features: Two isolated measurement inputs for both AC/DC voltages and currents RMS measurement or arithmetic mean value A digital signal output reacts to configured measurement range limits (on/off switching delay and threshold value switch function can be configured with up to two threshold values). Switchable filter function Safe 3-way isolation with 2.5 kV test voltage per DIN EN 61010-1
- Available Quantity: 0
$488.00
Technical data
Configuration
Configuration options | DIP switch WAGO Interface Configuration Software WAGO Interface Configuration App DIP switch WAGO Interface Configuration Software WAGO Interface Configuration App |
Input
Input signal type | Voltage Current |
Input signal (V) | AC/DC 300 V (IN 1) |
Input signal (A) | AC/DC 0 … 5 A (IN 2) |
Frequency range | 15 … 70 Hz (AC) |
Input resistance (current input) | ≤ 10 mΩ |
Input resistance (voltage input) | ≥ 300 kΩ |
Input current (max.) | 10 A AC/DC (IN 2; permanent) |
Input voltage (max.) | 600 V (IN 1; permanent) |
Response threshold | 300 mV (IN 1); 10 mA (IN 2) |
Resolution (voltage) | 30 mV (IN 1) |
Resolution (current) | 1 mA (IN 2) |
Output – analog
Output signal type | Current Voltage |
Output signal (V) | 0 … 5 V 1 … 5 V 0 … 10 V 2 … 10 V |
Output signal (A) | 0 … 10 mA 2 … 10 mA 0 … 20 mA 4 … 20 mA |
Load impedance (voltage output) | ≥ 1 kΩ |
Load impedance (current output) | ≤ 600 Ω |
Output – digital
Switching voltage (DO) max. | Supply voltage applied |
Continuous current (DO) max. | 100 mA (no internal restriction) |
Number of switching thresholds (DO) | 1 or 2 (adjustable) |
Configurable rise/fall delay time (DO) | 0 … 60 s (via software) |
Signal processing
Measurement method | RMS measurement; Arithmetic mean value |
Limit frequency | 2 kHz |
Software filter (adjustable) | Moving average value (filter level: 30) |
Step response (typ.) | 100 ms |
Measurement error
Transmission error (max.) | ≤ 0.5 % (of the full scale value) |
Temperature coefficient | ≤ 0.01 %/K |
Supply
Power supply type | 24 VDC |
Nominal supply voltage US | DC 24 V |
Supply voltage range | ±30 % |
Current consumption at nominal supply voltage | ≤ 46 mA (+ IDO) |
Safety and protection
Measurement category per EN/UL 61010-2-030 | CAT II (input) |
Note on insulation parameters | The digital output (DO) is at the potential of the supply. Danger: Configuration via the service interface must only be performed with a voltage-free measurement input! Danger: Configuration via the service interface must only be performed with a voltage-free measurement input! The digital output (DO) is at the potential of the supply |
Protection type | IP20 |
Connection data
Connection technology | Push-in CAGE CLAMP® |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
Width | 6 mm / 0.236 inches |
Height | 94 mm / 3.701 inches |
Depth from upper-edge of DIN-rail | 97.8 mm / 3.85 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Fire load | 0.015 |
Weight | 39.2 |
Environmental requirements
Ambient temperature (operation) | -40 … +70 °C (at nominal current) |
Surrounding air temperature (storage) | -40 … +85 °C |
Temperature range of connection cable per EN 61010-2-201 | ≥ (Tambient + 10 K) |
Temperature range of connection cable per UL 61010-2-201 (min.) | 90 |
Relative humidity | 5 … 95 % (no condensation permissible) |
Operating altitude (max.) | 2000 |
Standards and specifications
Conformity marking | CE |
EMC immunity to interference | EN 61000-6-2; EN 61326-2-3; EN 50121-3-2 |
EMC emission of interference | EN 61000-6-3; EN 61326-2-3; EN 50121-3-2 |
Standards/specifications | EN 50121-3-2 EN 61010-1 EN 61373 |
Bid Text
857-569
857-569
857-569
Instruction Leaflet
Signal conditioner; power; configurable; with digital output
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Software for Interface-Products
WAGO Interface Configuration Software G2 FULL
WAGO Interface Configuration Software G2 SMALL
CAD data
2D/3D Models 857-569
CAE data
WSCAD Universe 857-569
ZUKEN Portal 857-569
EPLAN Data Portal 857-569
Compliance Search
Environmental Product Compliance 857-569