KNHE20 - KNHE20 Water-to-Air
- Brand: Kooltronic
- Product Code: KNHE20
Description:
Description
KOOLTRONIC Water-to-Air Heat Exchangers provide uniform
cooling in a closed-loop system where a reliable source of clean, cool water is
available. The KNHE Series was designed primarily for
use in harsh environments with cooling requirements in excess of the capabilities
of air-to-air heat exchangers or air conditioners. They are particularly useful
in highly contaminated environments that would require very frequent cleaning or
changing of ambient air filters, or require frequent cleaning of the heat exchanger
core. KOOLTRONIC KNHE NEMA 4/4X Water-to-Air Heat Exchangers
can furnish greater cooling capacities than air-to-air models, depending on water
temperature and rate of flow. Ambient air is sealed out; heat transfer surfaces
remain clean.
The higher cooling capacity of the KNHE Series depends
on the temperature of the cooling water. Thus, if the water is cold enough, the
temperature of the air delivered to the electronics cabinet can actually be lower
than that provided by air conditioners, at less cost. This unit combines the best
features of the NEMA 4/4X heat exchangers with the increased cooling capacity offered
by the water-to-air models, in addition to the added benefit of compact size.
KOOLTRONIC also designs and manufactures a variety of heat exchangers to meet
unique specifications. We invite your inquiries about our modification and
custom-design capabilities.
Description:
Description
KOOLTRONIC Water-to-Air Heat Exchangers provide uniform
cooling in a closed-loop system where a reliable source of clean, cool water is
available. The KNHE Series was designed primarily for
use in harsh environments with cooling requirements in excess of the capabilities
of air-to-air heat exchangers or air conditioners. They are particularly useful
in highly contaminated environments that would require very frequent cleaning or
changing of ambient air filters, or require frequent cleaning of the heat exchanger
core. KOOLTRONIC KNHE NEMA 4/4X Water-to-Air Heat Exchangers
can furnish greater cooling capacities than air-to-air models, depending on water
temperature and rate of flow. Ambient air is sealed out; heat transfer surfaces
remain clean.
The higher cooling capacity of the KNHE Series depends
on the temperature of the cooling water. Thus, if the water is cold enough, the
temperature of the air delivered to the electronics cabinet can actually be lower
than that provided by air conditioners, at less cost. This unit combines the best
features of the NEMA 4/4X heat exchangers with the increased cooling capacity offered
by the water-to-air models, in addition to the added benefit of compact size.
KOOLTRONIC also designs and manufactures a variety of heat exchangers to meet
unique specifications. We invite your inquiries about our modification and
custom-design capabilities.
Data
Closed-Loop Cooling
- The enclosure interior airflow system is isolated from the ambient airflow or waterflow system. No ambient air can invade the cool, dehumidified sensitive component compartment.
NEMA 4/4X Rating Maintained (UL50)
- All units are fully gasketed for tight, leakproof installation, in compliance with the NEMA 4 and 4X Enclosure Ratings.
Stainless Steel Shell
- For applications in corrosive or other hostile environments such as those requiring Internal Corrosion Resistant Coatings, especially where chemical/moisture combinations are present.
Internal Corrosion Protection - KNHE Series
- This protection increases reliability in hostile environments. This protection for the cooling system consists of an air cured coating applied to the brazed joints, providing a degree of protection from corrosive environments. This coating will withstand 1000 hours of salt spray per the ASTM B 117 test method. NOTE: Severe operational environments such as wastewater treatment and salt spray are likely to cause corrosion failure over a period of time regardless of coating. This coating provides protection to the external portion of the coil and does not protect from any corrosive elements in the cooling water used internally. Warranty: Corrosive conditions may affect the warranty coverage. Consult factory for warranty limitations in corrosive environments. NOTE: For additional corrosion protection options, contact factory.
2-D Drawing of the Mounting Plan
KNHE20 Drawing of the Mounting Plan [27Kb]
3-D Solid Model
KNHE20 Solid Model [2108Kb]
Data Sheet
KNHE20 data Sheet [334Kb]
GA Drawing
KNHE20 General Arrangement Drawing [70Kb]
Installation Instructions
KNHE20 Installation Instructions (2 pages) [211Kb]
Literature
Condensate Evaporator Kits [241Kb]
Increasing the Lifespan and Reliability of Electrical Components [212Kb]
Kooltronic Custom Capabilities Flyer [2194Kb]
Kooltronic Custom Cooling Medical Flyer [211Kb]
Kooltronic Design Guide/Catalog (220 pages) [229400Kb]
Kooltronic Refrigeration System Manufacturing [55Kb]
Kooltronic Standard Warranty [55Kb]
Kooltronic Unit Longevity Press Release [167Kb]
NEMA Enclosure Ratings [91Kb]
Short-Form Catalog (16 pages) [897Kb]
Airflow Switch Data Sheet [159Kb]
Heat Exchanger Quick-Sheet [90Kb]
Laboratory Environmental Testing Services [157Kb]
Powder Paint Application Facilities Flyer [165Kb]
Operator's Manual
KLLC100 Lead-Lag Controller [38Kb]
KLLC480 Lead-Lag Controller [79Kb]
KNHE20 Operator's Manual [254Kb]