286-307/004-000 - Relay module; Nominal input voltage: 110 VDC; 1 changeover contact; Limiting continuous current: 3 A; Railway; Red status indicator; Module width: 15 mm; gray
- Brand: Wago
- Product Code: 286-307/004-000
Description:
- Available Quantity: 0
$109.00
Technical data
Control circuit
Nominal input voltage UN | DC 110 V |
Input voltage range | -30 … +25 % |
Nominal input current at UN | 3.1 mA |
Load circuit
Number of changeover contacts | 1 |
Contact material (relay) | AgNi 0.15 |
Limiting continuous current | 3 A |
Switching voltage (max.) | AC 250 V |
Switching power (resistive) max. | AC 750 VA |
Pull-in time (typ.) | 8 |
Drop-out time (typ.) | 6 |
Bounce time (typ.) | 4 |
Signaling
Status indicator | Red LED |
Safety and protection
Rated voltage | 300 |
Overvoltage category | II |
Pollution degree | 2 |
Dielectric strength (control/load circuit) (AC, 1 min) | 3 kVrms |
Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
Insulation type (control/load circuit) | Reinforced insulation (safe isolation) |
Insulation type (adjacent devices) | Reinforced insulation (safe isolation) |
Protection type | IP20 |
Physical data
Width | 15 mm / 0.591 inch |
Height from upper-edge of DIN-rail | 82.5 mm / 3.248 inch |
Depth | 52 mm / 2.047 inch |
Mechanical data
Mounting type | Pluggable module for receptacle terminal blocks |
Material data
Color | gray |
Fire load | 0.323 |
Weight | 23.1 |
Environmental requirements
Ambient temperature (operation at UN) | -25 … 70 °C |
Surrounding air temperature (storage) | -25 … +70 °C |
Processing temperature | -25 … +50 °C |
Relative humidity | 5 … 85 % (no condensation permissible) |
Operating altitude (max.) | 2000 |
Standards and specifications
Standards/specifications | EN 61010-2-201 |
Instruction Leaflet
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAE data
WSCAD Universe 286-307/004-000
WSCAD Universe 286-307/004-000
Compliance Search
Environmental Product Compliance 286-307/004-000