286-791 - Optocoupler module; Nominal input voltage: 24 VDC; Output voltage range: 20 … 60 VDC; Limiting continuous current: 0.1 A; 2-wire connection; Frequency: 3 kHz; Red status indicator; Module width: 10 mm; gray
- Brand: Wago
- Product Code: 286-791
- Available Quantity: 0
$38.33
Technical data
Control circuit
Nominal input voltage UN | DC 24 V |
Input voltage range (high level) | DC 15 … 30 V |
Nominal input current at UN | 14 mA |
Load circuit
Circuit type | 2-wire connection |
Limiting continuous current | 0.1 A |
Output voltage range | DC 20 … 60 V |
Voltage drop at output (max.) | ≤ DC 2 V |
Leakage current at rated voltage | ≤ 2 µA |
Turn-on time | ≤ 10 µs |
Turn-off time | ≤ 50 µs |
Switching frequency | ≤ 3 kHz |
Safety and protection
Rated voltage | 300 |
Overvoltage category | II |
Pollution degree | 2 |
Dielectric strength (control/load circuit) (AC, 1 min) | 2.5 kVrms |
Insulation type (control/load circuit) | Basic insulation |
Protection type | IP20 |
Notes
Note | Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks. |
Physical data
Width | 10 mm / 0.394 inch |
Height from upper-edge of DIN-rail | 82.5 mm / 3.25 inch |
Depth | 52 mm / 2.047 inch |
Mechanical data
Mounting type | Pluggable module for receptacle terminal blocks |
Material data
Color | gray |
Fire load | 0.279 |
Weight | 15.3 |
Environmental requirements
Ambient temperature (operation at UN) | -25 … 40 °C |
Surrounding air temperature (storage) | -25 … +40 °C |
Processing temperature | -25 … +50 °C |
Relative humidity | 5 … 95 % (no condensation permissible) |
Operating altitude (max.) | 2000 |
Standards and specifications
Standards/specifications | EN 61010-2-201 EN 61000-6-1 EN 61000-6-2 EN 61000-6-3 |