288-320 - Relay module; Nominal input voltage: 24 VDC; 1 make contact; Limiting continuous current: 16 A; for lamp loads; Module width: 21 mm
- Brand: Wago
- Product Code: 288-320
- Available Quantity: 0
$75.80
Technical data
Control circuit
Nominal input voltage UN | DC 24 V |
Input voltage range | ±10 % |
Nominal input current at UN | 21.8 mA |
Load circuit
Number of make/switch-on contacts | 1 |
Contact material (relay) | AgSnO2 |
Limiting continuous current | 16 A |
Inrush current (resistive) max. | (AC) 25 A / 4 s |
Switching voltage (max.) | AC 400 V |
Switching power (resistive) max. | AC 4000 VA; DC (see load limit curve) |
Recommended minimum load | 12 V / 100 mA |
Pull-in time (typ.) | 8 |
Drop-out time (typ.) | 2 |
Bounce time (typ.) | 2 |
Mechanical life | 30 x 10⁶ switching operations |
Safety and protection
Rated voltage | 300 |
Rated surge voltage | 4 |
Overvoltage category | II |
Pollution degree | 2 |
Dielectric strength (control/load circuit) (AC, 1 min) | 3 kVrms |
Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
Insulation type (control/load circuit) | Reinforced insulation (safe isolation) |
Insulation type (between adjacent devices of the same type) | Reinforced insulation (safe isolation) |
Connection data
Connection technology | CAGE CLAMP® |
WAGO connector | WAGO 236 Series |
Solid conductor | 0.08 … 2.5 mm² / 28 … 12 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 12 AWG |
Strip length | 5 … 6 mm / 0.2 … 0.24 inches |
Physical data
Width | 20.5 mm / 0.807 inches |
Height | 85 mm / 3.346 inches |
Depth from upper-edge of DIN-rail | 47 mm / 1.85 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Fire load | 0.492 |
Weight | 43.2 |
Environmental requirements
Ambient temperature (operation at UN) | -25 … 40 °C |
Surrounding air temperature (storage) | -25 … +70 °C |
Processing temperature | -25 … +50 °C |
Standards and specifications
Standards/specifications | EN 61010-2-201 |