750-319/004-000 - Fieldbus Coupler LON®-Peer
- Brand: Wago
- Product Code: 750-319/004-000
Description: The data exchange coupler transfers the input process image data to the output process image of the coupled partner. The data exchange coupler is a variant of the LON® Fieldbus Coupler. Applications: Point‐to‐Point one master and one slave(Peer‐to‐Peer) Distribution one master and several slaves (Broadcast) The coupler, together with I/O modules, is a fieldbus node which is connected to other nodes using a twisted 2-wire cable. The coupler can also be integrated into existing LON® networks if appropriate node addresses are available. The coupler automatically creates the process image using both data types and widths of the connected I/O modules. It mirrors its input process image onto the output process image of its partner(s). The monitoring system switches digital outputs off or stores the last analog value if the connection to the coupled partner is interrupted longer than one second.
Description: The data exchange coupler transfers the input process image data to the output process image of the coupled partner. The data exchange coupler is a variant of the LON® Fieldbus Coupler. Applications: Point‐to‐Point one master and one slave(Peer‐to‐Peer) Distribution one master and several slaves (Broadcast) The coupler, together with I/O modules, is a fieldbus node which is connected to other nodes using a twisted 2-wire cable. The coupler can also be integrated into existing LON® networks if appropriate node addresses are available. The coupler automatically creates the process image using both data types and widths of the connected I/O modules. It mirrors its input process image onto the output process image of its partner(s). The monitoring system switches digital outputs off or stores the last analog value if the connection to the coupled partner is interrupted longer than one second.
Notes
Note | LON® is a registered trademark of Echelon Corporation. |
Technical data
Transceiver | FTT 10 A |
Topology | per LON specification |
Number of fieldbus nodes on master (max.) | 127 |
Baud rate | - |
Bus segment length (max.) | 2700 m; 500 m (free topology); 2700 m (bus topology) |
Transmission medium | Twisted pair – FTT |
Number of modules per node (max.) | 62 |
Supply voltage (system) | 24 VDC (-15 … +20 %); via pluggable connector (CAGE CLAMP® connection) |
Current consumption (5 V system supply) | 300 |
Total current (system supply) | 1,700 |
Supply voltage (field) | 24 VDC (-15 … +20 %); via power jumper contacts |
Input current (typ.) at nominal load (24 V) | 500 |
Power supply efficiency (typ.) at nominal load (24 V) | 87 |
Isolation | 500 V system/field |
Number of outgoing power jumper contacts | 3 |
Current carrying capacity (power jumper contacts) | 10 |
Connection data
Connection technology: communication/fieldbus | LonWorks: 1 x Male connector; 2-pole |
Connection technology: field supply | 6 x CAGE CLAMP® |
Connection technology: system supply | 2 x CAGE CLAMP® |
Connection technology: device configuration | 1 x Male connector; 4-pole |
Connection type 1 | System/field supply |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inch |
Physical data
Width | 50.5 mm / 1.988 inch |
Height | 100 mm / 3.937 inch |
Depth | 71.1 mm / 2.799 inch |
Depth from upper-edge of DIN-rail | 63.9 mm / 2.516 inch |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 2.887 |
Weight | 195.5 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-4 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
LON data exchange coupler (peer-to-peer)
System Manual Series 750/753
System Description
Use in Hazardous Environments
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Firmware
0750-0319, Feldbuskoppler LonWorks®
CAD data
2D/3D Models 750-319/004-000
CAE data
EPLAN Data Portal 750-319/004-000
WSCAD Universe 750-319/004-000
ZUKEN Portal 750-319/004-000
WSCAD Universe 750-319/004-000
EPLAN Data Portal 750-319/004-000
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-319/004-000