750-333/040-000 - Fieldbus Coupler PROFIBUS DP; 2nd Generation; 12 MBd; Extreme

Note

Note: Configuration files required (GSD)!

Communication

PROFIBUS

Number of fieldbus nodes on master (max.)

96

Number of I/O points

6,000

Baud rate

9.6 kBd … 12 MBd

Bus segment length (max.)

1200 m

Transmission medium

Cu cable per EN 50170

Transmission time

typ. 1 ms (10 couplers; each 32 digital I/O and 12 Mbaud) max. 3.3 ms

Number of modules per node (max.)

63

Input and output process image (fieldbus) max.

244 bytes/244 bytes

Supply voltage (system)

24 VDC; via pluggable connector (CAGE CLAMP® connection); Derating must be observed!

Current consumption (5 V system supply)

200

Total current (system supply)

1,800

Supply voltage (field)

24 VDC; Power supply via pluggable connector (CAGE CLAMP® connection); Transmission via power jumper contacts; Derating must be observed!

Input current (typ.) at nominal load (24 V)

500

Power supply efficiency (typ.) at nominal load (24 V)

90

Rated surge voltage

1 kV

Number of outgoing power jumper contacts

2

Current carrying capacity (power jumper contacts)

10

Ratings per

IEC/EN 60664-1

Derating

Derating (supply voltage): Ambient temperatures under laboratory conditions: (−25 … +30 %); for −40 … +55 °C: 24 V (−25 … +20 %); for +55 … +70 °C: 24 V (−25 … +10 %); Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple)

Standard

EN 50170

Connection technology: communication/fieldbus

PROFIBUS: 1 x D-Sub 9 socket

Connection technology: field supply

4 x CAGE CLAMP^®

Connection technology: system supply

2 x CAGE CLAMP^®

Connection technology: device configuration

1 x Male connector; 4-pole

Connection type 1

System/field supply

Solid conductor

0.25 … 2.5 mm² / 24 … 14 AWG

Fine-stranded conductor

0.25 … 2.5 mm² / 24 … 14 AWG

Strip length

8 … 9 mm / 0.31 … 0.35 inches

Width

50.5 mm / 1.988 inches

Height

100 mm / 3.937 inches

Depth

71.1 mm / 2.799 inches

Depth from upper-edge of DIN-rail

63.9 mm / 2.516 inches

Mounting type

DIN-35 rail

Color

dark gray

Housing material

Polycarbonate; polyamide 6.6

Fire load

0.469

Weight

180

Conformity marking

CE

Ambient temperature (operation)

-40 … +70 °C

Surrounding air temperature (storage)

-40 … +85 °C

Protection type

IP20

Pollution degree (5)

2 per IEC 61131-2

Operating altitude

without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.)

Mounting position

horizontal (standing/lying); vertical

Relative humidity (without condensation)

95

Relative humidity (with condensation)

Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)

Vibration resistance

per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155; EN 61373

Shock resistance

per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks; 25g/6 ms/1,000 shocks), EN 50155, EN 61373

EMC immunity to interference

Per EN 61000-6-1, -2; EN 61131-2; marine applications; EN 50121-3-2; EN 50121-4, -5; EN 60255-26;
EN 60870-2-1; EN 61850-3; IEC 61000-6-5; IEEE 1613; VDEW: 1994

EMC emission of interference

per EN 61000-6-4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5

Exposure to pollutants

Per IEC 60068-2-42 and IEC 60068-2-43

Permissible pollutant concentration H₂S at a relative humidity < 75%

10

Permissible pollutant concentration SO ₂ at a relative humidity < 75%

25