750-494/000-001 - 3-Phase Power Measurement; 480 VAC, 5 A
- Brand: Wago
- Product Code: 750-494/000-001
Description: The 750-494 3-Phase Power Measurement Module measures electrical data in a three-phase supply network. The voltage is measured via network connection to clamping points L1, L2, L3 and N. The current of the three phases is fed to IL1, IL2, IL3, and IN via current transformers. The 3-phase power measurement module transmits all metrics (e.g., reactive/apparent/effective power, energy consumption, power factor, phase angle, frequency, over-/undervoltage) directly to the process image, without requiring high computing power from the controller. Both comprehensive metrics and harmonic analysis up to the 41st harmonic permit extensive network analysis via the fieldbus. These metrics enable the operator to optimize supply to a drive or machine, protecting the system from damage and failure. The four-quadrant display indicates the load type (inductive, capacitive) and whether it is an energy consumer or producer.
Description: The 750-494 3-Phase Power Measurement Module measures electrical data in a three-phase supply network. The voltage is measured via network connection to clamping points L1, L2, L3 and N. The current of the three phases is fed to IL1, IL2, IL3, and IN via current transformers. The 3-phase power measurement module transmits all metrics (e.g., reactive/apparent/effective power, energy consumption, power factor, phase angle, frequency, over-/undervoltage) directly to the process image, without requiring high computing power from the controller. Both comprehensive metrics and harmonic analysis up to the 41st harmonic permit extensive network analysis via the fieldbus. These metrics enable the operator to optimize supply to a drive or machine, protecting the system from damage and failure. The four-quadrant display indicates the load type (inductive, capacitive) and whether it is an energy consumer or producer.
- Available Quantity: 0
$646.10
Technical data
Number of measurement inputs | 6 (3 voltage measurement inputs, 3 current measurement inputs) |
Signal type | Power measurement |
Signal form | Any periodic signals (considering the threshold frequencies) |
Resolution [bit] | 24 |
Data width | 2 x 128-bit data; 2 x 64-bit control/status |
Voltage path input resistance (typ.) | 1072 |
Current path input resistance (typ.) | 5 mΩ |
Reference for measurement error | AC current/voltage |
Measurement error, reference temperature | 25 |
Measurement error, deviation max (upper-range value) ≤± | 0.5 |
Measurement current (max.) | 5 A |
Measurement cycle time | Adjustable for the arithmetic mean value, min./max. values |
Frequency range (mains frequency) | 45 … 65 Hz |
Frequency range (harmonics analysis) | 0 … 3300 Hz |
Limit frequency | 15.9 |
Rated voltage | ULN = 277 VAC/DC; ULL = 480 VAC |
Calculated values | Line-to-line voltage, power output, energy, power factors, mains frequency, harmonic analysis (up to the 41st harmonic), THD |
Measurement components | Evaluating |
Measurement method | True RMS measurement |
Configuration options | WAGO-I/O-CHECK CODESYS Library e!COCKPIT |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 100 |
Isolation | 4 kV system/field |
Rated surge voltage | 4 kV |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 67.8 mm / 2.669 inches |
Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.942 |
Weight | 48.5 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-3 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
3-Phase Power Measurement Module
System Manual Series 750/753
Bid Text
750-494/000-001
750-494/000-001
Additional Information
Disposal; Electrical and electronic equipment, Packaging
System Description
750/753 Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Library
Bausteinbeschreibung für die PowerMeasurement_494_02.lib
CAD data
2D/3D Models 750-494/000-001
CAE data
EPLAN Data Portal 750-494/000-001
WSCAD Universe 750-494/000-001
ZUKEN Portal 750-494/000-001
WSCAD Universe 750-494/000-001
EPLAN Data Portal 750-494/000-001
Compliance Search
Environmental Product Compliance 750-494/000-001