750-528 - 4-channel digital output; 30 VAC/VDC; 2.0 A; Solid-state; isolated
- Brand: Wago
- Product Code: 750-528
Description: This digital output module transmits control signals from the automation device to the connected actuators. The module has four semiconductor switches with very low on-resistance MOSFETs suitable for both AC and DC voltages. The semiconductor outputs are not permanently short-circuit proof so external fusing is required. The control of the semiconductor outputs is galvanically isolated from the internal system voltage. Furthermore, the output channels of the 750-528 I/O Module are also electrically isolated from each other. The field supply voltage is fed to the right-hand modules via the power contacts. The signal states for controlling the four digital outputs are indicated by status LEDs. Notice: If AC voltages are fed via the power contacts or DC voltages >31.2 V are used, a suitable supply module (e.g., 750-612) must be provided!
Description: This digital output module transmits control signals from the automation device to the connected actuators. The module has four semiconductor switches with very low on-resistance MOSFETs suitable for both AC and DC voltages. The semiconductor outputs are not permanently short-circuit proof so external fusing is required. The control of the semiconductor outputs is galvanically isolated from the internal system voltage. Furthermore, the output channels of the 750-528 I/O Module are also electrically isolated from each other. The field supply voltage is fed to the right-hand modules via the power contacts. The signal states for controlling the four digital outputs are indicated by status LEDs. Notice: If AC voltages are fed via the power contacts or DC voltages >31.2 V are used, a suitable supply module (e.g., 750-612) must be provided!
- Available Quantity: 0
$141.50
Technical data
Number of digital outputs | 4 |
Number of Channels | 4 |
Signal type | Voltage |
Signal type (voltage) | 30 VAC/DC |
Actuator connection | 4 x (2-wire) |
Output characteristic | high-side switching |
Output current per channel | 2 |
Output current (module) | 8 |
Output current | requires external fuses |
Switching frequency (max.) | 1 Hz |
Load type | Resistive; inductive (Limit induction voltage peaks externally.) |
Contact resistance (max.) | 0.04 |
Contact resistance (typ.) | 0.02 |
Delay time T_on from 0 to 1 | 1000 |
Delay time T_off from 1 to 0 | 20000 |
Inductive load switch-off energy dissipation (max.) | 0.18 |
Output data width (internal) max. | 4 |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 57 |
Supply voltage (field) | 30 VSELV AC/DC; via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Current consumption, field supply (module with no external load) | 0 |
Isolation | 500 V system/field or channel/channel |
Indicators | LED (A, B, E, F) green: Status DO 1 … DO 4 |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Current carrying capacity (power jumper contacts) | 10 |
Overvoltage category | II |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69.8 mm / 2.748 inches |
Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inches |
Mechanical data
Mounting type | DIN-35 rail |
Pluggable connector | Fixed |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.954 |
Weight | 48.6 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Protection class | III |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-1, -2; marine applications |
EMC emission of interference | per EN 61000-6-3, -4; marine applications |
Exposure to pollutants | per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
4DO AC/DC 30 V; SSR Isolated
System Manual Series 750/753
Bid Text
750-528
750-528
System Description
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAE data
ZUKEN Portal 750-528
CAD data
2D/3D Models 750-528
Compliance Search
Environmental Product Compliance 750-528