750-630/000-005 - SSI transmitter interface; 15 bits; 125 kHz; Gray code; Status byte
- Brand: Wago
- Product Code: 750-630/000-005
Description: This module is an SSI interface for the direct connection to an SSI transmitter. After the module has given a clock pulse to the sensor, the module reads the incoming data and transmits it directly as a data word into the process image of the PLC or PC. The power supply for the transmitter is derived internally from the power jumper contacts.
Description: This module is an SSI interface for the direct connection to an SSI transmitter. After the module has given a clock pulse to the sensor, the module reads the incoming data and transmits it directly as a data word into the process image of the PLC or PC. The power supply for the transmitter is derived internally from the power jumper contacts.
- Available Quantity: 0
$599.10
Technical data
Signal type | Differential signal (RS-422) |
Encoder connection | On + D, -D / Off + CI, - CI |
Supply voltage (encoder) | 24 VDC; via power jumper contacts |
Serial input | Data width: 15 bits |
Data transmission rate | 125 |
Data width | 1 x 32-bit; 1 x 8-bit control/status (optional) |
Code | Gray code |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 20 |
Supply voltage (field) | 24 VDC (-15 … +20 %); via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Isolation | 500 V system/field |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inch |
Physical data
Width | 12 mm / 0.472 inch |
Height | 100 mm / 3.937 inch |
Depth | 69.8 mm / 2.748 inch |
Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inch |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 1.005 |
Weight | 51 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-4, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
SSI transmitter interface
System Manual Series 750/753
Bid Text
750-630/000-005
750-630/000-005
System Description
750/753 Series I/O-System ‒ General Product Information
Use in Hazardous Environments
Overview on WAGO-I/O-SYSTEM 750 approvals
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 750-630/000-005
CAE data
EPLAN Data Portal 750-630/000-005
WSCAD Universe 750-630/000-005
ZUKEN Portal 750-630/000-005
WSCAD Universe 750-630/000-005
EPLAN Data Portal 750-630/000-005
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-630/000-005