750-632 - Proportional valve module
- Brand: Wago
- Product Code: 750-632
Description: The 750-632 Proportional Valve Module controls two single-coil valves with up to 24 V/1.6 A or one valve with up to 24 V/2 A. The module features two current-controlled PWM* outputs with adjustable dithering. Both unipolar and bipolar valve control are possible. Additionally, operation of a valve with two unipolar coils is also provided. The module is single-channel in this operating mode! Characteristic curve adaptations, such as zero offset, dual gain compensation or range limitations, can be adjusted via parameters. Scaling and configurable up/down ramps permit set point adjustment to the application. For example, monitoring threshold value switches is performed via two additional digital inputs. Start-up and valve parameters adjustment are performed via WAGO-I/O-CHECK software or the controller. *PWM = Pulse width modulation
Description: The 750-632 Proportional Valve Module controls two single-coil valves with up to 24 V/1.6 A or one valve with up to 24 V/2 A. The module features two current-controlled PWM* outputs with adjustable dithering. Both unipolar and bipolar valve control are possible. Additionally, operation of a valve with two unipolar coils is also provided. The module is single-channel in this operating mode! Characteristic curve adaptations, such as zero offset, dual gain compensation or range limitations, can be adjusted via parameters. Scaling and configurable up/down ramps permit set point adjustment to the application. For example, monitoring threshold value switches is performed via two additional digital inputs. Start-up and valve parameters adjustment are performed via WAGO-I/O-CHECK software or the controller. *PWM = Pulse width modulation
- Available Quantity: 0
$539.90
Technical data
Number of digital inputs | 2 |
Number of outputs | 2 bipolar outputs (A+, A- and B+, B-) |
Type of output | H-bridge output with current-regulated PWM output (short-circuit-proof and thermal overload-proof for each channel) |
Input characteristic | high-side switching |
Input characteristic | Type 1 |
Input current (typ.) | 2.7 mA at 24 V |
Output current | 1-channel operation: 2 A; 2-channel operation: 1.6 A per channel |
Load type | Operating range: inductive (1 mH … 600 mH); Internal load resistance (> 8 Ohm) |
PWM frequency (typ.) | 50 |
Data width | 6 bytes: single-channel operating mode; 12 bytes: dual-channel operating mode |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 125 |
Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Current consumption, field supply (module with no external load) | 20 |
Isolation | 500 V system/field |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Connection data
Connection technology: inputs / outputs | 16 x Push-in CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 1.5 mm² / 28 … 16 AWG |
Fine-stranded conductor | 0.25 … 1.5 mm² / 22 … 16 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Connection requirement (permissible cable length) | 30 |
Connection requirement (permissible cable type) | Outputs |
Conductor type (1) | f-st |
Conductor type (2) | s |
Conductor type 1 | fine-stranded |
Conductor type 2 | solid |
Note (conductor cross-section) | Coil connections A+/A-/B+/B-: 1.5 mm²/16 AWG; For use according to UL 508: 16 AWG for all connections |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69 mm / 2.717 inches |
Depth from upper-edge of DIN-rail | 61.8 mm / 2.433 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.824 |
Weight | 54.4 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-4, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
Proportional Valve Module
System Manual Series 750/753
Bid Text
750-632
750-632
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Application Note e!COCKPIT
e!COCKPIT Application Note WagoAppSolenoid
Application note SIEMENS
Proportional Valve Module 750-632 And TIA (a500431)
Application Note CoDeSys 2.3
CoDeSys V2.3 function blocks for the solenoid module 750-632 (a500530)
Library
Function blocks supporting valve module 750-632
CAD data
2D/3D Models 750-632
CAE data
EPLAN Data Portal 750-632
WSCAD Universe 750-632
ZUKEN Portal 750-632
Compliance Search
Environmental Product Compliance 750-632