750-635 - Digital impulse interface
- Brand: Wago
- Product Code: 750-635
Description: This digital impulse interface connects magnetostrictive position sensors equipped with a start/stop interface. After receiving a read pulse, these sensors deliver a time-delayed reply impulse. The time delay is proportional to the sensor distance. Each sensor may have up to four position transmitters (permanent magnets). Their position data can be accessed serially by the controller and are stored in the process image of the fieldbus coupler as a 24-bit value. The parameterization of the ultrasonic speed and the transmission points is done via the control byte. The parameters can be changed during operation. The transmission of the impulses is done with RS-422 differential drivers which guarantees trouble-free data transmission. Position sensors with the following features can be used: Start/stop interface with RS-422 differential signals, 24 V sensor supply, manufacturer: e.g., Balluff
Description: This digital impulse interface connects magnetostrictive position sensors equipped with a start/stop interface. After receiving a read pulse, these sensors deliver a time-delayed reply impulse. The time delay is proportional to the sensor distance. Each sensor may have up to four position transmitters (permanent magnets). Their position data can be accessed serially by the controller and are stored in the process image of the fieldbus coupler as a 24-bit value. The parameterization of the ultrasonic speed and the transmission points is done via the control byte. The parameters can be changed during operation. The transmission of the impulses is done with RS-422 differential drivers which guarantees trouble-free data transmission. Position sensors with the following features can be used: Start/stop interface with RS-422 differential signals, 24 V sensor supply, manufacturer: e.g., Balluff
- Available Quantity: 0
$443.60
Technical data
Number of inputs | 1 |
Signal type | Differential signal (RS-422) |
Encoder connection | Start/stop; Initialization; Uv; Ground; Shield connection via encoder housing |
Resolution | 1 µm |
Update time (update rate) | 2 |
Data width | 1 x 24-bit data 1 x 8-bit control/status |
Position sensor length | 4 |
Hysteresis (precision) | Depends on position sensor |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 45 |
Supply voltage (field) | 24 VDC (-15 … +20 %); via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Isolation | 500 V system/field |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Connection requirement (permissible cable length) | 500 |
Connection requirement (permissible cable type) | RS-422 |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69.8 mm / 2.748 inches |
Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 1.297 |
Weight | 49.9 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-4 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
Digital impulse interface
System Manual Series 750/753
Bid Text
750-635
750-635
Additional Information
Disposal; Electrical and electronic equipment, Packaging
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Application note SIEMENS
Balluff Micropulse Linear Transducer BTL5-P1-xxxx on Simatic S7 (a101702)
CAD data
2D/3D Models 750-635
CAE data
EPLAN Data Portal 750-635
WSCAD Universe 750-635
ZUKEN Portal 750-635
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-635