750-636/000-800 - DC Drive Controller; 24 VDC; 5 A; Interference-free
- Brand: Wago
- Product Code: 750-636/000-800
Description: This module is a single‐channel, intelligent positioning controller for 24 VDC motors up to 5 A with incremental position feedback. Three 24 V inputs record the limit switches and a preset signal. An incremental encoder interface evaluates signals from the position sensor and determines the actual value. Where required, positioning optimizes the initial switching position as a function of direction, taking into account compensation for gearing backlash. Bidirectional control of the DC motor is implemented via a short-circuit-proof, temperature-monitored H-bridge. Both switched operation and soft start/stop or current reduction are possible via PWM control. The field-side 24 V supply voltage from the power contacts, which is monitored for undervoltage/overvoltage events, is looped through to adjacent modules. The module can also be used as: a dedicated incremental encoder or as a switch and power controller (PWM).
Description: This module is a single‐channel, intelligent positioning controller for 24 VDC motors up to 5 A with incremental position feedback. Three 24 V inputs record the limit switches and a preset signal. An incremental encoder interface evaluates signals from the position sensor and determines the actual value. Where required, positioning optimizes the initial switching position as a function of direction, taking into account compensation for gearing backlash. Bidirectional control of the DC motor is implemented via a short-circuit-proof, temperature-monitored H-bridge. Both switched operation and soft start/stop or current reduction are possible via PWM control. The field-side 24 V supply voltage from the power contacts, which is monitored for undervoltage/overvoltage events, is looped through to adjacent modules. The module can also be used as: a dedicated incremental encoder or as a switch and power controller (PWM).
- Available Quantity: 0
$443.60
Technical data
Number of digital inputs | 3 |
Number of outputs | 1 (A+; A-; H-bridge output) |
Encoder connection | A, B, zero low-side switching; 5 … 24 VDC / open collector |
Motor connection | A+, A-, H-bridge output; short-circuit-protected |
Quadrature decoder | 1x, 2x, 4x evaluation |
Input characteristic | high-side switching |
Input characteristic | Type 1 |
Input current at specific input voltage | -3.2 mA at 0.3 V |
Input current at specific input voltage (2) | 0 mA bei 5 V |
Input current (typ.) | 2.7 mA at 24 V |
Output current (max.) (motor) | 5 A (15 A / 500 ms), short-circuit-protected |
Current consumption (typ.) | 2 mA (UA) |
Voltage range for signal (0) | −3 … +1.5 VDC |
Voltage range for signal (1) | 2.4 … 30 VDC |
PWM frequency (typ.) | 20 |
Data width | 32-bit set/actual value; 16-bit control or status |
Limit frequency | 50 |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 55 |
Supply voltage (field) | 24 VDC (-15 … +20 %); via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Current consumption, field supply (module with no external load) | 10 |
Isolation | 500 V system/field |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 67.8 mm / 2.669 inches |
Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.954 |
Weight | 55 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-3 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
DC Drive Controller
System Manual Series 750/753
Bid Text
750-636/000-800
750-636/000-800
Additional Information
Disposal; Electrical and electronic equipment, Packaging
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
750/753 Series I/O-System ‒ General Product Information
Use in Hazardous Environments
CAE data
EPLAN Data Portal 750-636/000-800
WSCAD Universe 750-636/000-800
ZUKEN Portal 750-636/000-800
WSCAD Universe 750-636/000-800
EPLAN Data Portal 750-636/000-800
CAD data
2D/3D Models 750-636/000-800
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-636/000-800