750-637/000-002 - Incremental encoder interface; 24 VDC; Single-ended; 32 bits
- Brand: Wago
- Product Code: 750-637/000-002
Description: This module is an interface for any incremental encoder with standard connections. A counter with a quadrature decoder as well as a latch for the zero impulse can be read or enabled by the controller. The modules control can set the counter. Depending on the operating mode, the counter value is added to the latch register on a positive edge at the “C” or “Latch” input. The rate (increments/ms) is automatically acquired and can also be transmitted to the controller as an alternative to the latch value. A counter lock-out is possible using the “Gate” input. Input “Ref“ can be used to activate the initial point “C“ function. The cam outputs N1 and N2 indicate whether the counter value is within a defined range of values. The range can be adjusted. The module must be powered using an external 24 VDC power supply, from which power to the transmitter (Ui, U0) can also be derived. The shield directly connects to the DIN-rail.
Description: This module is an interface for any incremental encoder with standard connections. A counter with a quadrature decoder as well as a latch for the zero impulse can be read or enabled by the controller. The modules control can set the counter. Depending on the operating mode, the counter value is added to the latch register on a positive edge at the “C” or “Latch” input. The rate (increments/ms) is automatically acquired and can also be transmitted to the controller as an alternative to the latch value. A counter lock-out is possible using the “Gate” input. Input “Ref“ can be used to activate the initial point “C“ function. The cam outputs N1 and N2 indicate whether the counter value is within a defined range of values. The range can be adjusted. The module must be powered using an external 24 VDC power supply, from which power to the transmitter (Ui, U0) can also be derived. The shield directly connects to the DIN-rail.
- Available Quantity: 0
$644.80
Technical data
Counter depth | 32 |
Encoder connection | A; B; C (single-ended inputs) |
Supply voltage (encoder) | 24 VDC |
Supply current (encoder) max. | 300 |
Zero impulse (latch) | 32 |
Quadrature decoder | 4x evaluation |
Input current (typ.) | Latch 5 mA, Gate 7 mA, Ref. 7 mA |
Output current per channel | 0.5 |
Output current | short-circuit-protected |
Output voltage | 24 VDC |
Voltage range for signal (0) | −3 … +5 VDC |
Voltage range for signal (1) | 15 … 30 VDC |
Data width | 1 x 32-bit data 2 x 8-bit control/status |
Limit frequency | 250 |
Commands | Reading, setting, activating |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 110 |
Current consumption, field supply (module with no external load) | 35 |
Isolation | 500 V system/field |
Connection data
Connection technology: inputs / outputs | 16 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inch |
Physical data
Width | 24 mm / 0.945 inch |
Height | 100 mm / 3.937 inch |
Depth | 69.8 mm / 2.748 inch |
Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inch |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 2.12 |
Weight | 99.8 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-4, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
Incremental encoder interface
System Manual Series 750/753
Bid Text
750-637/000-002
750-637/000-002
System Description
750/753 Series I/O-System ‒ General Product Information
Use in Hazardous Environments
Overview on WAGO-I/O-SYSTEM 750 approvals
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 750-637/000-002
CAE data
EPLAN Data Portal 750-637/000-002
WSCAD Universe 750-637/000-002
ZUKEN Portal 750-637/000-002
WSCAD Universe 750-637/000-002
EPLAN Data Portal 750-637/000-002
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-637/000-002