750-637/040-001 - Incremental encoder interface; 24 VDC; Differential input; 32 bits; Extreme
- Brand: Wago
- Product Code: 750-637/040-001
Description: This module is an interface for any incremental encoder with standard connections. A counter with a quadrature decoder as well as a latch for the zero impulse can be read or enabled by the controller. The modules control can set the counter. As an alternative this can also be done using input “C” or “Latch.” The rate (increments/ms) is automatically acquired and can also be transmitted to the controller as an alternative to the latch value. A counter lock-out is possible using the “Gate” input. Input “Ref“ can be used to activate the initial point “C“ function. The cam outputs N1 and N2 indicate whether the counter value is within a defined range of values. The range can be adjusted. Both the module and the 24 V encoder require a 24 VDC power supply. The shield directly connects to the DIN-rail. The device is ideal for operation in extreme environments thanks to: An extended temperature range Greater immunity to impulse voltages and electromagnetic interference Higher vibration and shock resistance
Description: This module is an interface for any incremental encoder with standard connections. A counter with a quadrature decoder as well as a latch for the zero impulse can be read or enabled by the controller. The modules control can set the counter. As an alternative this can also be done using input “C” or “Latch.” The rate (increments/ms) is automatically acquired and can also be transmitted to the controller as an alternative to the latch value. A counter lock-out is possible using the “Gate” input. Input “Ref“ can be used to activate the initial point “C“ function. The cam outputs N1 and N2 indicate whether the counter value is within a defined range of values. The range can be adjusted. Both the module and the 24 V encoder require a 24 VDC power supply. The shield directly connects to the DIN-rail. The device is ideal for operation in extreme environments thanks to: An extended temperature range Greater immunity to impulse voltages and electromagnetic interference Higher vibration and shock resistance
- Available Quantity: 0
$766.60
Technical data
Counter depth | 32 |
Encoder connection | A, A/, B, B/, C, C/ |
Supply voltage (encoder) | 24 VDC |
Zero impulse (latch) | 32 |
Quadrature decoder | 4x evaluation |
Input current (typ.) | Latch 7 mA, Gate 7 mA, Ref. 7 mA |
Output current per channel | 0.5 |
Output current | short-circuit-protected |
Output voltage | 24 VDC |
Voltage range for signal (0) | (UABC - UABC/): -30 … +15 VDC; Latch, gate, ref.: -3 … +5 VDC |
Voltage range for signal (1) | (UABC - UABC/): 15 … 30 VDC; Latch, gate, ref.: 15 … 30 VDC |
Data width | 1 x 32-bit data 2 x 8-bit control/status |
Limit frequency | 250 |
Commands | Reading, setting, activating |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 110 |
Current consumption, field supply (module with no external load) | 35 |
Rated surge voltage | 1 kV |
Connection data
Connection technology: inputs / outputs | 16 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.25 … 2.5 mm² / 24 … 14 AWG |
Fine-stranded conductor | 0.25 … 2.5 mm² / 24 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inch |
Physical data
Width | 24 mm / 0.945 inch |
Height | 100 mm / 3.937 inch |
Depth | 67.8 mm / 2.669 inch |
Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inch |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | dark gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.273 |
Weight | 116.8 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | -40 … +70 °C |
Surrounding air temperature (storage) | -40 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.) |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Relative humidity (with condensation) | Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation) |
Vibration resistance | per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155; EN 61373 |
Shock resistance | per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks; 25g/6 ms/1,000 shocks), EN 50155, EN 61373 |
EMC immunity to interference | Per EN 61000-6-1, -2; EN 61131-2; marine applications; EN 50121-3-2; EN 50121-4, -5; EN 60255-26; |
EMC emission of interference | per EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual XTR
Incremental encoder interface /XTR
System Manual Series 750/753
Bid Text
750-637/040-001
750-637/040-001
System Description
750 XTR Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 750-637/040-001
CAE data
EPLAN Data Portal 750-637/040-001
EPLAN Data Portal 750-637/040-001
ZUKEN Portal 750-637/040-001
Compliance Search
Environmental Product Compliance 750-637/040-001