750-654 - Serial Data Exchange Interface
- Brand: Wago
- Product Code: 750-654
Description: The data exchange module allows the exchange of data between different fieldbus systems. Two modules form a communication pair that is installed in fieldbus nodes and connected by two twisted wire pairs. Data exchange is performed in full duplex operation, independent of the fieldbus system used. The data in the fieldbus couplers output process image is transmitted to the communication partner. This module then transmits the data to the input process image of its fieldbus coupler and vice versa. Factory preset transmission is 32 bits of input data and 32 bits of output data. Data transfer time for 32 bit-I/O is about 5 ms. The “function“ LED indicates a data exchange with the coupler. The status of the data transmission is indicated by the TxD and RxD LEDs.
Description: The data exchange module allows the exchange of data between different fieldbus systems. Two modules form a communication pair that is installed in fieldbus nodes and connected by two twisted wire pairs. Data exchange is performed in full duplex operation, independent of the fieldbus system used. The data in the fieldbus couplers output process image is transmitted to the communication partner. This module then transmits the data to the input process image of its fieldbus coupler and vice versa. Factory preset transmission is 32 bits of input data and 32 bits of output data. Data transfer time for 32 bit-I/O is about 5 ms. The “function“ LED indicates a data exchange with the coupler. The status of the data transmission is indicated by the TxD and RxD LEDs.
Technical data
Baud rate | 62.5 kBd |
Bit transfer | via 2 twisted pairs with differential signals |
Transmission channels | 1 TxD / 1 RxD, full-duplex |
Line length | approx. 1000 m twisted pair |
Data width | 1 x 32-bit input/output; 1 x 8-bit control/status |
Line impedance | 120 |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 65 |
Isolation | 500 V system/field |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69.8 mm / 2.748 inches |
Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.085 |
Weight | 49 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-4, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
Data exchange module
System Manual Series 750/753
Bid Text
750-654
750-654
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 750-654
CAE data
WSCAD Universe 750-654
ZUKEN Portal 750-654
EPLAN Data Portal 750-654
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-654