750-657 - IO-Link Master
- Brand: Wago
- Product Code: 750-657
Description: Increasingly complex products, manufacturing flexibility and high demands on quality assurance require intelligent, configurable and programmable sensors. To fulfill these demands, IO-Link streamlines the varying interfaces required to connect to a control system and tooling. A 3-wire connection can communicate process data (as single bits, bytes and data blocks for input and output data). It also communicates acyclic data (for identification, configuration, parameterization and diagnostics) with up to 230.4 kBaud to both sensors and actuators. The functions and performance data are defined in device description files for master and devices; these are easy to customize via WAGO-I/O-CHECK. If a device must be replaced, the configuration and parameterization can be automatically restored without maintenance personnel. Project design, installation and operation are simplified! Four different IO-Link devices or standard digital sensors/actuators can simultaneously connect to the WAGO 750-657 IO-Link Master. At just 12 mm (0.47 inch) wide, the module has three connections for each of the four channels.
Description: Increasingly complex products, manufacturing flexibility and high demands on quality assurance require intelligent, configurable and programmable sensors. To fulfill these demands, IO-Link streamlines the varying interfaces required to connect to a control system and tooling. A 3-wire connection can communicate process data (as single bits, bytes and data blocks for input and output data). It also communicates acyclic data (for identification, configuration, parameterization and diagnostics) with up to 230.4 kBaud to both sensors and actuators. The functions and performance data are defined in device description files for master and devices; these are easy to customize via WAGO-I/O-CHECK. If a device must be replaced, the configuration and parameterization can be automatically restored without maintenance personnel. Project design, installation and operation are simplified! Four different IO-Link devices or standard digital sensors/actuators can simultaneously connect to the WAGO 750-657 IO-Link Master. At just 12 mm (0.47 inch) wide, the module has three connections for each of the four channels.
Technical data
Topology | Number of IO-Link ports: 4 |
Sensor connection | 4 x (3-wire) |
Actuator connection | 4 x (3-wire) |
Transmission modes | 4.8 kBaud (COM 1), 38.4 kBaud (COM 2), 230.4 kBaud (COM 3) |
Data width | 4–24 bytes, configurable |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 40 |
Supply voltage (field) | 24 VDC (-15 … +20 %); via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Current consumption, field supply (module with no external load) | 50 |
Isolation | 500 V system/field |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Connection data
Connection technology: inputs / outputs | 16 x Push-in CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 1.5 mm² / 28 … 16 AWG |
Fine-stranded conductor | 0.25 … 1.5 mm² / 22 … 16 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Connection requirement (permissible cable length) | 20 |
Conductor type (1) | f-st |
Conductor type (2) | s |
Conductor type 1 | fine-stranded |
Conductor type 2 | solid |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69 mm / 2.717 inches |
Depth from upper-edge of DIN-rail | 61.8 mm / 2.433 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.824 |
Weight | 49.6 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, EN 61131-2 |
EMC emission of interference | per EN 61000-6-4, EN 61131-2 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
4-channel IO-Link Master
System Manual Series 750/753
Bid Text
750-657
750-657
ausschreiben.de 750-657
System Description
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Application Note e!COCKPIT
e!COCKPIT Application Note WagoAppPowerSupply (a2019012)
Application note SIEMENS
WAGO TIA IO Link 750-657 (a117502)
Application Note TIA Portal
Power supply Pro 2 with IO-Link Interface (a2019010)
Library
Function blocks for the IO-Link module 750-657
WAGO IO-Link Configurator
WAGO IO-Link Configurator
CAD data
2D/3D Models 750-657
CAE data
WSCAD Universe 750-657
ZUKEN Portal 750-657
EPLAN Data Portal 750-657
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-657