753-646 - KNX/EIB/TP1 Interface
- Brand: Wago
- Product Code: 753-646
Description: The 753-646 KNX/EIB/TP1 Module connects to a KNX/EIB/TP1 network. This module supports two different functions: 1. Device mode: With this module, all programmable fieldbus controllers relevant for building automation can be connected to a KNX/TP1 network. In a KNX network, the module appears as a standard KNX device and is linked via ETS 3 Professional Commissioning Tool. The module supports a maximum of 253 communication objects with any DPTs, 254 group addresses and 254 associations. The application is programmed via WAGO‐I/O‐PRO Software. An ETS plug-in, which is included in the WAGO product database, is required so that the data from the application program can be allocated to the group addresses. 2. Router mode: When the 750-849 or 750-889 KNX IP Controller is connected to the first 753-646 KNX/EIB/TP1 Module, the device can be used as a KNXnet/IP router. The module is switched to the router mode automatically. An application program is not required for operation in router mode. Additional modules that are connected to a KNX IP Controller are addressed in device mode by the application. WAGOs 753 Series Pluggable Connector with internally bridged contacts (3/7 and 4/8) is part of the delivery. Both an external KNX power supply and ETS Professional Software are required to operate the KNX/EIB/TP1 Module.
Description: The 753-646 KNX/EIB/TP1 Module connects to a KNX/EIB/TP1 network. This module supports two different functions: 1. Device mode: With this module, all programmable fieldbus controllers relevant for building automation can be connected to a KNX/TP1 network. In a KNX network, the module appears as a standard KNX device and is linked via ETS 3 Professional Commissioning Tool. The module supports a maximum of 253 communication objects with any DPTs, 254 group addresses and 254 associations. The application is programmed via WAGO‐I/O‐PRO Software. An ETS plug-in, which is included in the WAGO product database, is required so that the data from the application program can be allocated to the group addresses. 2. Router mode: When the 750-849 or 750-889 KNX IP Controller is connected to the first 753-646 KNX/EIB/TP1 Module, the device can be used as a KNXnet/IP router. The module is switched to the router mode automatically. An application program is not required for operation in router mode. Additional modules that are connected to a KNX IP Controller are addressed in device mode by the application. WAGOs 753 Series Pluggable Connector with internally bridged contacts (3/7 and 4/8) is part of the delivery. Both an external KNX power supply and ETS Professional Software are required to operate the KNX/EIB/TP1 Module.
- Available Quantity: 0
$673.40
Technical data
Device specification | KNX/TP1 bus specification: 1.0 |
Device-specific | Number of group addresses: 254; Number of communication objects: 253; Number of associations: 254 |
Current consumption (typ.) | 5 mA (KNX) |
Baud rate | 9.6 kBd (KNX) |
Data width | 24 bytes |
Power supply | KNX: via KNX power supply unit |
Commissioning | WAGO-I/O-PRO V2.3 |
Advanced diagnostics | via FbKNX_Master_646 function block (device mode) |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 25 |
Isolation | 2.5 kV (rms) |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Connection point (other) designation | Programming button; Bridge 2/6 |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69 mm / 2.717 inches |
Depth from upper-edge of DIN-rail | 61.8 mm / 2.433 inches |
Mechanical data
Mounting type | DIN-35 rail |
Pluggable connector | Pluggable |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 1.031 |
Weight | 55.9 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-3, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
WAGO ETS Plug-in (Product Data Base)
KNX/EIB/TP1 Module
KNX/EIB/TP1 Module
System Manual Series 750/753
Bid Text
753-646
753-646
ausschreiben.de 753-646
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
750/753 Series I/O-System ‒ General Product Information
Use in Hazardous Environments
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Application Note CoDeSys 2.3
KNX Function Macros
Application Note Library KNX_02.lib
Application Note ThebenKNX_DALI
Application Note KNX StarterKit3
Application Note e!COCKPIT
eCOCKPIT Application Note WagoAppKNX
Library
Libraries for Building Automation CODESYS 2.3
e!COCKPIT libraries
e!COCKPIT Library Description WagoAppKNX
Product database
WAGO product database for KNX module 753-646
WAGO product database for KNX Router 750-889 / 750-849 + 753-646
CAD data
2D/3D Models 753-646
CAE data
WSCAD Universe 753-646
ZUKEN Portal 753-646
EPLAN Data Portal 753-646
Compliance Search
Environmental Product Compliance 753-646