753-647 - DALI Multi-Master
- Brand: Wago
- Product Code: 753-647
Description: The DALI Multi-Master (753-647) is certified according to the IEC 62386 DALI-2 standard. This manufacturer-independent protocol ensures the interoperability of DALI devices in lighting applications. Just 12 mm wide, this module is used as a DALI interface in combination with WAGOs 750 Series Controllers and Modules (e.g., BACnet, KNX, EnOcean, LON®, Modbus®). Each DALI Multi-Master supports 64 addresses for electronic control gears (ECGs) and 64 addresses for control devices (DALI multi sensors: Connection of max. 16 sensors recommended due to the cyclic transmission characteristics). Each DALI ECG can be assigned to 16 groups and 16 scenes. The DALI Multi-Master also offers 16 additional virtual groups on the DALI bus. Using the WAGO I/O System 750, DALI controllers can be seamlessly integrated into other building systems. Several DALI masters can connect to a single fieldbus node. The maximum number of modules that may be connected to a controller depends on the memory required by the application. The WAGO-I/O-PRO (CODESYS V2.3) or e!COCKPIT (based on CODESYS V3) programming software is used as the programming software for the fieldbus nodes. WAGO provides a comprehensive IEC-61131-3 library of function blocks, simplifying the creation of complex lighting applications. Alternatively, an “Easy Mode” allows lighting functions to be readily controlled without any complicated PLC programming. The comprehensive and easy-to-use WAGO DALI Configurator is available for commissioning and maintenance – it can either run as a stand-alone application or be called from the WAGO-I/O-CHECK (CODESYS V2.3) or e!COCKPIT Software (based on CODESYS V3). Two options are available to power to the DALI Multi-Master: 1. Via 753-620 DALI Multi-Master DC/DC Converter for powering a single module. 2. Via 787-1007 Power Supply for powering several 753-647 DALI Multi-Master Modules.
Description: The DALI Multi-Master (753-647) is certified according to the IEC 62386 DALI-2 standard. This manufacturer-independent protocol ensures the interoperability of DALI devices in lighting applications. Just 12 mm wide, this module is used as a DALI interface in combination with WAGOs 750 Series Controllers and Modules (e.g., BACnet, KNX, EnOcean, LON®, Modbus®). Each DALI Multi-Master supports 64 addresses for electronic control gears (ECGs) and 64 addresses for control devices (DALI multi sensors: Connection of max. 16 sensors recommended due to the cyclic transmission characteristics). Each DALI ECG can be assigned to 16 groups and 16 scenes. The DALI Multi-Master also offers 16 additional virtual groups on the DALI bus. Using the WAGO I/O System 750, DALI controllers can be seamlessly integrated into other building systems. Several DALI masters can connect to a single fieldbus node. The maximum number of modules that may be connected to a controller depends on the memory required by the application. The WAGO-I/O-PRO (CODESYS V2.3) or e!COCKPIT (based on CODESYS V3) programming software is used as the programming software for the fieldbus nodes. WAGO provides a comprehensive IEC-61131-3 library of function blocks, simplifying the creation of complex lighting applications. Alternatively, an “Easy Mode” allows lighting functions to be readily controlled without any complicated PLC programming. The comprehensive and easy-to-use WAGO DALI Configurator is available for commissioning and maintenance – it can either run as a stand-alone application or be called from the WAGO-I/O-CHECK (CODESYS V2.3) or e!COCKPIT Software (based on CODESYS V3). Two options are available to power to the DALI Multi-Master: 1. Via 753-620 DALI Multi-Master DC/DC Converter for powering a single module. 2. Via 787-1007 Power Supply for powering several 753-647 DALI Multi-Master Modules.
- Available Quantity: 0
$519.20
Notes
Note | The 753 Series Plug is included with delivery. |
Technical data
Device specification | DALI-2 Specification: DIN IEC 62386 only in conjunction with 753-620 or 787-1007 Power Supplies |
Device-specific | Current consumption from DALI bus with alternative supply via DALI bus: 10 mA |
Topology | Number of control gears/control devices (DALI): 64 control gears + 64 control devices (addressable) |
Transmission channel | 1 |
Data width | 24-byte data |
Guaranteed supply current | 200 |
Supply current (max.) | 250 |
Power supply | DALI: 18 V (external) |
Commissioning | via WAGO-I/O-CHECK |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 85 |
Isolation | 2100 VDC DALI bus/local bus |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69 mm / 2.717 inches |
Depth from upper-edge of DIN-rail | 61.8 mm / 2.433 inches |
Mechanical data
Mounting type | DIN-35 rail |
Pluggable connector | Pluggable |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 1.033 |
Weight | 61.4 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2*, *only in connection with 753-620 DC/DC Converter or 787-1007 Power Supply |
EMC emission of interference | per EN 61000-6-3*, *only in connection with 753-620 DC/DC Converter or 787-1007 Power Supply |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
WAGO DALI Configurator
DALI Multi-Master Module
System Manual Series 750/753
Bid Text
753-647
753-647
ausschreiben.de 753-647
Compatibility Information
Compatibility List DALI Sensors
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Application Note CoDeSys 2.3
Application note: DALI 753-647 Configuration Interface
Application Note ThebenKNX_DALI
Application Note e!COCKPIT
e!COCKPIT application note WagoAppDALI
e!COCKPIT libraries
e!COCKPIT Library Description WagoAppDALI
Library
Libraries for Building Automation CODESYS 2.3
Configuration and Commissioning Software
WAGO DALI Configurator Setup (753-647)
CAE data
EPLAN Data Portal 753-647
ZUKEN Portal 753-647
WSCAD Universe 753-647
CAD data
2D/3D Models 753-647
Compliance Search
Environmental Product Compliance 753-647